Tripp Lite B064-016-04-IPG, B064-032-04-IPG, B064-032-02-IPG owner manual User Macros, System Macros

Page 58

Remote Session Operation (continued)

Control Panel (continued)

User Macros

The User Macros page allows you to add macros to the KVM switch that can be performed on any of the connected computers using the Macro List feature of the control panel. (See Macro List section under Control Panel in Remote Session Operation for details.) By default, the User Macros page is displayed when the Hotkeys / Macros icon is clicked on. To display the page when it isn’t selected, click on the User Macros button at the top of the Hotkeys / Macros screen.

To create a macro, follow the steps below.

1.Click the Add button on the right side of the screen.

2.In the name field that appears, key in a name for the macro you are adding.

3.With the new macro highlighted, click the Record button on the right side of the screen. Recording will begin and the following panel will be displayed in the upper-left corner of the remote screen.

4.Enter in the macro hotkey sequence and then click the Done button. You will be returned to the User Macros screen, with your macro name and hotkey combination added to the list. Repeat this procedure for any additional macros you wish to create. Note: Clicking the Pause button will pause/unpause the recording of the hotkey sequence. Clicking the Cancel button will cancel the recording of the hotkey sequence. Clicking the Show button will display the hotkeys as they are entered.

System Macros

The System Macros page allows you to add macros to the KVM switch that can be performed automatically upon closing a session. For example, you can create a macro that sends the Winkey-L combination, causing a computer’s login page to come up the next time it is accessed. To display the System Macros page when it isn’t selected, click on the System Macros button at the top of the Hotkeys / Macros screen.

To create a macro, follow the steps below.

1.Click the Add button on the right side of the screen.

2.In the name field that appears, key in a name for the macro you are adding.

3.With the new macro highlighted, click the Record button on the right side of the screen. Recording will begin and the following panel will be displayed in the upper-left corner of the remote screen.

4.Enter in the macro hotkey sequence and then click the Done button. You will be returned to the System Macros screen, with your macro name and hotkey combination added to the list. Repeat this procedure for any additional macros you wish to create. Note: Clicking the Pause button will pause/unpause the recording of the hotkey sequence. Clicking the Cancel button will cancel the recording of the hotkey sequence. Clicking the Show button will display the hotkeys as they are entered.

Once system macros are created, they are available to be assigned to ports, with only one macro allowed per port. (See the Port Configuration section under OSD Operation for details on assigning system macros.)

58

Image 58
Contents NetDirector Cat5 IP KVM Switches ModelsTable of Contents Introduction FeaturesRemote Console Computer Requirements Server Interface Units SIUs Supported Video ResolutionsConnected Computer/Server Requirements Supported Operating SystemsFront View Supported BrowsersComponents No.. Component DescriptionRear View Hardware Setup General Safety InstructionsStacking Single-Stage InstallationRack Mounting Safety Instructions Rack MountingTwo-Stage Installation Two-Stage Installations Powering Off & RestartingSingle-Stage Installations Hot PluggingNetwork Setup IP Address Determination Super Administrator SetupFirst Time Setup Local ConsoleBrowser IP InstallerNIC Settings Redundant NICChanging the Super Administrator Login Logging Into the B064-Series KVM SwitchLocal Console Login Browser Login AP Windows Client LoginConnection Screen AP Java Client LoginFile Menu Web Browser Main OSD OperationOSD Main AP Client MainLocal Console Main Port AccessOSD Tab Bar Icon DescriptionInternet Explorer ConnectionsNon-Windows Browser Port Naming Panel Array ModePort Selection List ScanAttribute Description HistoryPort Level Section DescriptionAdding a Favorite FavoritesModifying a Favorite User Preferences Setting DescriptionDisable it. The default setting is enabled Scan DurationAccess SessionsClick until you toggle to the desired setting Port ConfigurationAccess Virtual media mounted to the selected portAssociated Link Port PropertyTime. Choices are Exclusive, Occupy and Share User Management Adding User AccountsField Description Groups Modifying User AccountsDeleting User Accounts Groups Creating GroupsGroups Deleting Groups Groups Modifying GroupsAssigning Users to Groups Assigning Users to a Group via the User’s Notebook Removing Users From a Group via the User’s NotebookAssigning Users to a Group via the Group’s Notebook Removing Users From a Group via the Group’s NotebookDevice Assignment Device Information Power Supply DetectionDevice Management OSD Operation for detailsOperating Mode NetworkWhen using them to connect to the KVM switch Advanced Network Management Settings Radius Settings AuthenticationDisable Local Authentication Ldap / Ldaps Authentication and Authorization SettingsInstall the Active Directory Schema Snap-in Install the Windows 2003 Support ToolsCreating a Start Menu Shortcut Entry Common Name userprofile Ldap Display Name userprofile Extend and Update the Active Directory SchemaSelect New Attribute Minimum MaximumClick Edit to bring up the String Attribute Editor OpenLDAP Server Installation OpenLDAP ServerStarting the OpenLDAP Server OpenLDAP Server ConfigurationCustomizing the OpenLDAP Schema Ldap DIT Design and Ldif FileUsing the New Schema DIT CreationEnable Dial Back Enable Dial OutConnection Setup Example Windows XP SecurityIP Filtering Login FailuresFiltering To delete an IP filterAccount Policy MAC Filtering Login StringEncryption Working Mode Private CertificateCertificate Signing Request Email Address Administrator@yourcompany.comField Example Time Zone Date/TimeNetwork Time Log Notification SettingsLog Information Main Firmware Upgrade Recovery MaintenanceUpgrade Main Firmware Main ScreenUpgrade Adapters SIU Firmware Upgrade RecoveryRestore Backup/RestoreBackup Ping HostDownload Reset on ExitSystem Operation Remote Session Operation Control PanelHotkeys Hotkey DescriptionUser Macros System MacrosChoosing a pre-determined configuration RGBGamma Adjustment Compose Panel USB Ports on Front Panel of KVM SwitchUser List Panel Message Display PanelVirtual Media Virtual Media via Remote SessionVirtual Media via Local Console Mac and Linux ConsiderationsWindows Mouse Synchronization ProceduresManual Mouse Synchronization Windows XP and laterRemote Session Operation Remote Session Operation Hotkey Action OSD ToolbarToolbar Hotkeys Icon in the ToolbarPanel Array Toolbar Multiuser Operation Auto ScanningStarting Up InstallationLog Server Menu BarEdit ConfigureAdd DeleteEvents MaintenanceSearch Help Contents Network RetryOptions Log Server Main Screen OverviewRecording List PanelEvent Panel They will not be able to communicateProblem Action General Operation TroubleshootingAdministration Troubleshooting AppendixVirtual Media Troubleshooting Mouse TroubleshootingAP Windows Client Troubleshooting Panel Array Mode Troubleshooting WinClient ActiveX Viewer TroubleshootingJava Applet & AP Java Client Troubleshooting Log Server Troubleshooting Sun Systems TroubleshootingSetting Default SpecificationsFactory Default Settings Switch RJ45 Pins Modem DB9Fan Location & Speed Information Temperature Sensor LocationFan Speed Warranty Registration Year Limited Warranty
Related manuals
Manual 4 pages 42.85 Kb

B064-016-02-IPG, B064-032-02-IPG, B064-016-04-IPG, B064-032-04-IPG specifications

The Tripp Lite B064-032-04-IPG is a highly efficient and versatile KVM switch that offers seamless control over multiple computers or servers from a single console. This device is engineered for professionals and IT administrators who require robust management of servers or machines located in different physical locations, particularly in demanding environments like data centers or server rooms.

One of the standout features of the B064-032-04-IPG is its ability to facilitate access to up to 32 computers using a single set of keyboard, video monitor, and mouse. This not only streamlines workflows but also reduces clutter, as users no longer need multiple sets of peripherals for each machine. The switch supports both USB and PS/2 connection types, making it compatible with a wide range of devices.

The B064-032-04-IPG leverages advanced technology to offer a responsive and high-resolution video output, supporting resolutions up to 1920 x 1200. This ensures that users can easily view and interact with multiple systems without sacrificing visual quality. Additionally, the switch features a built-in web interface that allows administrators to configure settings with ease, enabling effective management in remote or local scenarios.

Security is a top priority with the B064-032-04-IPG, which supports user authentication and multi-level password protection. This guarantees that only authorized personnel can access sensitive systems, bolstering the overall security posture of the network. Furthermore, the switch includes features for firmware updates, ensuring that it stays current with the latest security protocols and enhancements.

Another key characteristic of this KVM switch is its support for hot-swappable functionality, which allows users to add or remove servers without needing to power down the entire system. This greatly enhances operational efficiency and minimizes downtime during maintenance or upgrades.

Built with a sturdy and reliable design, the Tripp Lite B064-032-04-IPG is suitable for various environments, including those that require ruggedness and durability. Its compact form factor makes installation straightforward, and its fanless design ensures silent operation, which is ideal for noise-sensitive areas.

In conclusion, the Tripp Lite B064-032-04-IPG is a powerful KVM switch that combines multiple advanced features, technologies, and characteristics, making it an excellent choice for large-scale server management. With its ease of use, security features, and high performance, it provides a seamless solution for IT professionals looking to optimize their hardware management in complex environments.