Tripp Lite B064-032-04-IPG, B064-032-02-IPG Maintenance, Main Screen, Upgrade Main Firmware

Page 52

OSD Operation (continued)

Maintenance

The Maintenance section is used to upgrade the B064-Series KVM Switch’s firmware, as well as the firmware of the Server Interface Units (SIUs) used to connect its ports to the installed devices.

Note: Super Administrators are the only users who are guaranteed access to the Maintenance section of the KVM. Administrators and Users can only access this function if they are given permission.

The Main Screen

The Maintenance section can be used to upgrade the KVM and SIU firmware, backup/restore system configuration and account information, ping network devices, and restore the KVMs default values. When selected, the Maintenance section opens with the Upgrade Main Firmware subsection displayed.

Upgrade Main Firmware

The Upgrade Main Firmware sub-section is used to upgrade the firmware of the KVM switch. As firmware upgrades become available, they can be found on www.tripplite.com/support. To upgrade the KVM firmware, follow the steps below.

1.Go to www.tripplite.com/support to download the most current firmware and save it to a computer that is not connected to the KVM switch.

2.Logon to the OSD, and navigate to the Maintenance section, which will open with the Upgrade Main Firmware sub-section page displayed.

3.By default, the Check Main Firmware Version box is checked, which causes the KVM to check to see if the current firmware is newer than that of the firmware file you are using to upgrade the KVM. If the current version is newer, you will not be allowed to continue with the upgrade. If you wish to perform a firmware upgrade without checking to see if the current firmware version is newer than the upgrade file, simply uncheck this checkbox.

4.Click the Browse button, and then navigate to and select the firmware upgrade file you downloaded from the Tripp Lite website. When selected, the Upgrade Firmware button becomes active.

5.Click the Upgrade Firmware button to begin the firmware upgrade. As the upgrade proceeds, progress is shown in the Upload Progress bar.

6.When the upload is complete, a pop-up appears stating System will reboot in a few seconds. The KVM switch will reboot (this may take a few minutes), and the upgrade will be complete. In the event of a firmware upgrade failure, see the Main Firmware Upgrade Recovery section below.

Main Firmware Upgrade Recovery

Should the KVM firmware upgrade procedure fail, and the switch becomes unusable, follow the steps below to restore the KVM.

1.Power off the KVM.

2.Press and hold the Reset switch on the front of the unit.

3.Power on the KVM while holding down the Reset switch.

4.The KVM will be restored to the originally installed firmware version. You will now be able to access the KVM switch and try upgrading the firmware again.

52

Image 52
Contents NetDirector Cat5 IP KVM Switches ModelsTable of Contents Introduction FeaturesRemote Console Computer Requirements Supported Video Resolutions Connected Computer/Server RequirementsServer Interface Units SIUs Supported Operating SystemsSupported Browsers ComponentsFront View No.. Component DescriptionRear View Hardware Setup General Safety InstructionsSingle-Stage Installation Rack Mounting Safety InstructionsStacking Rack MountingTwo-Stage Installation Powering Off & Restarting Single-Stage InstallationsTwo-Stage Installations Hot PluggingSuper Administrator Setup First Time SetupNetwork Setup IP Address Determination Local ConsoleIP Installer NIC SettingsBrowser Redundant NICChanging the Super Administrator Login Logging Into the B064-Series KVM SwitchLocal Console Login Browser Login AP Windows Client LoginConnection Screen AP Java Client LoginFile Menu OSD Operation OSD MainWeb Browser Main AP Client MainPort Access OSD Tab BarLocal Console Main Icon DescriptionInternet Explorer ConnectionsNon-Windows Browser Panel Array Mode Port Selection ListPort Naming ScanHistory Port LevelAttribute Description Section DescriptionAdding a Favorite FavoritesModifying a Favorite Setting Description Disable it. The default setting is enabledUser Preferences Scan DurationAccess SessionsPort Configuration AccessClick until you toggle to the desired setting Virtual media mounted to the selected portAssociated Link Port PropertyTime. Choices are Exclusive, Occupy and Share User Management Adding User AccountsField Description Modifying User Accounts Deleting User AccountsGroups Groups Creating GroupsGroups Deleting Groups Groups Modifying GroupsAssigning Users to Groups Assigning Users to a Group via the User’s Notebook Removing Users From a Group via the User’s NotebookAssigning Users to a Group via the Group’s Notebook Removing Users From a Group via the Group’s NotebookDevice Assignment Power Supply Detection Device ManagementDevice Information OSD Operation for detailsOperating Mode NetworkWhen using them to connect to the KVM switch Advanced Network Management Settings Authentication Disable Local AuthenticationRadius Settings Ldap / Ldaps Authentication and Authorization SettingsInstall the Active Directory Schema Snap-in Install the Windows 2003 Support ToolsCreating a Start Menu Shortcut Entry Extend and Update the Active Directory Schema Select New AttributeCommon Name userprofile Ldap Display Name userprofile Minimum MaximumClick Edit to bring up the String Attribute Editor OpenLDAP Server Installation OpenLDAP ServerOpenLDAP Server Configuration Customizing the OpenLDAP SchemaStarting the OpenLDAP Server Ldap DIT Design and Ldif FileUsing the New Schema DIT CreationEnable Dial Back Enable Dial OutConnection Setup Example Windows XP SecurityLogin Failures FilteringIP Filtering To delete an IP filterAccount Policy MAC Filtering Login StringEncryption Working Mode Private CertificateCertificate Signing Request Email Address Administrator@yourcompany.comField Example Time Zone Date/TimeNetwork Time Log Notification SettingsLog Information Maintenance Upgrade Main FirmwareMain Firmware Upgrade Recovery Main ScreenUpgrade Adapters SIU Firmware Upgrade RecoveryBackup/Restore BackupRestore Ping HostDownload Reset on ExitSystem Operation Remote Session Operation Control PanelHotkeys Hotkey DescriptionUser Macros System MacrosChoosing a pre-determined configuration RGBGamma Adjustment USB Ports on Front Panel of KVM Switch User List PanelCompose Panel Message Display PanelVirtual Media Virtual Media via Remote SessionVirtual Media via Local Console Mac and Linux ConsiderationsMouse Synchronization Procedures Manual Mouse SynchronizationWindows Windows XP and laterRemote Session Operation Remote Session Operation OSD Toolbar Toolbar HotkeysHotkey Action Icon in the ToolbarPanel Array Toolbar Multiuser Operation Auto ScanningInstallation Log ServerStarting Up Menu BarConfigure AddEdit DeleteEvents MaintenanceSearch Contents Network Retry OptionsHelp Log Server Main Screen OverviewList Panel Event PanelRecording They will not be able to communicateGeneral Operation Troubleshooting Administration TroubleshootingProblem Action AppendixVirtual Media Troubleshooting Mouse TroubleshootingAP Windows Client Troubleshooting Panel Array Mode Troubleshooting WinClient ActiveX Viewer TroubleshootingJava Applet & AP Java Client Troubleshooting Log Server Troubleshooting Sun Systems TroubleshootingSpecifications Factory Default SettingsSetting Default Switch RJ45 Pins Modem DB9Fan Location & Speed Information Temperature Sensor LocationFan Speed Warranty Registration Year Limited Warranty
Related manuals
Manual 4 pages 42.85 Kb

B064-016-02-IPG, B064-032-02-IPG, B064-016-04-IPG, B064-032-04-IPG specifications

The Tripp Lite B064-032-04-IPG is a highly efficient and versatile KVM switch that offers seamless control over multiple computers or servers from a single console. This device is engineered for professionals and IT administrators who require robust management of servers or machines located in different physical locations, particularly in demanding environments like data centers or server rooms.

One of the standout features of the B064-032-04-IPG is its ability to facilitate access to up to 32 computers using a single set of keyboard, video monitor, and mouse. This not only streamlines workflows but also reduces clutter, as users no longer need multiple sets of peripherals for each machine. The switch supports both USB and PS/2 connection types, making it compatible with a wide range of devices.

The B064-032-04-IPG leverages advanced technology to offer a responsive and high-resolution video output, supporting resolutions up to 1920 x 1200. This ensures that users can easily view and interact with multiple systems without sacrificing visual quality. Additionally, the switch features a built-in web interface that allows administrators to configure settings with ease, enabling effective management in remote or local scenarios.

Security is a top priority with the B064-032-04-IPG, which supports user authentication and multi-level password protection. This guarantees that only authorized personnel can access sensitive systems, bolstering the overall security posture of the network. Furthermore, the switch includes features for firmware updates, ensuring that it stays current with the latest security protocols and enhancements.

Another key characteristic of this KVM switch is its support for hot-swappable functionality, which allows users to add or remove servers without needing to power down the entire system. This greatly enhances operational efficiency and minimizes downtime during maintenance or upgrades.

Built with a sturdy and reliable design, the Tripp Lite B064-032-04-IPG is suitable for various environments, including those that require ruggedness and durability. Its compact form factor makes installation straightforward, and its fanless design ensures silent operation, which is ideal for noise-sensitive areas.

In conclusion, the Tripp Lite B064-032-04-IPG is a powerful KVM switch that combines multiple advanced features, technologies, and characteristics, making it an excellent choice for large-scale server management. With its ease of use, security features, and high performance, it provides a seamless solution for IT professionals looking to optimize their hardware management in complex environments.