Tripp Lite B064-032-02-IPG Logging Into the B064-Series KVM Switch, Local Console Login

Page 13

Super Administrator Setup (continued)

Changing the Super Administrator Login

To change the default Super Administrator Username and Password, do the following:

1. At the top of the OSD page, click User Management.

Since this is the first time the page is being accessed, only the Super Administrator appears:

2.Click Administrator in the left panel; or, select Administrator in the central panel and click the Modify button at the bottom of the page.

The User Information page appears:

3.Change the Username and Password to something unique.

4.Re-enter the password to confirm it is correct.

5.Click Save.

6.When the dialog box informing you that the change completed successfully appears, click OK.

Logging Into the B064-Series KVM Switch

The B064-Series KVM Switches can be accessed in the following ways: via local console, an internet browser, the AP Windows Client and/or the AP Java Client. Operating the KVM switch and configuring its settings is done the same regardless of how you connect to the B064-Series KVM Switch; the only difference is the way in which you establish the connection. This chapter describes the login procedures for each of these methods.

Local Console Login

The local console login dialog box is displayed once the installation is complete. Simply key in your Username and Password and click Login to bring up the OSD Main Page.

Note: If you supply an invalid login, the authentication routine will return an Invalid Username or Password message. If you see this message, log in again being careful to enter the correct Username and Password.

13

Image 13
Contents Models NetDirector Cat5 IP KVM SwitchesTable of Contents Introduction FeaturesRemote Console Computer Requirements Connected Computer/Server Requirements Supported Video ResolutionsServer Interface Units SIUs Supported Operating SystemsComponents Supported BrowsersFront View No.. Component DescriptionRear View General Safety Instructions Hardware SetupRack Mounting Safety Instructions Single-Stage InstallationStacking Rack MountingTwo-Stage Installation Single-Stage Installations Powering Off & RestartingTwo-Stage Installations Hot PluggingFirst Time Setup Super Administrator SetupNetwork Setup IP Address Determination Local ConsoleNIC Settings IP InstallerBrowser Redundant NICChanging the Super Administrator Login Logging Into the B064-Series KVM SwitchLocal Console Login AP Windows Client Login Browser LoginConnection Screen AP Java Client LoginFile Menu OSD Main OSD OperationWeb Browser Main AP Client MainOSD Tab Bar Port AccessLocal Console Main Icon DescriptionInternet Explorer ConnectionsNon-Windows Browser Port Selection List Panel Array ModePort Naming ScanPort Level HistoryAttribute Description Section DescriptionAdding a Favorite FavoritesModifying a Favorite Disable it. The default setting is enabled Setting DescriptionUser Preferences Scan DurationSessions AccessAccess Port ConfigurationClick until you toggle to the desired setting Virtual media mounted to the selected portAssociated Link Port PropertyTime. Choices are Exclusive, Occupy and Share Adding User Accounts User ManagementField Description Deleting User Accounts Modifying User AccountsGroups Groups Creating GroupsGroups Deleting Groups Groups Modifying GroupsAssigning Users to Groups Removing Users From a Group via the User’s Notebook Assigning Users to a Group via the User’s NotebookRemoving Users From a Group via the Group’s Notebook Assigning Users to a Group via the Group’s NotebookDevice Assignment Device Management Power Supply DetectionDevice Information OSD Operation for detailsNetwork Operating ModeWhen using them to connect to the KVM switch Advanced Network Management Settings Disable Local Authentication AuthenticationRadius Settings Ldap / Ldaps Authentication and Authorization SettingsInstall the Active Directory Schema Snap-in Install the Windows 2003 Support ToolsCreating a Start Menu Shortcut Entry Select New Attribute Extend and Update the Active Directory SchemaCommon Name userprofile Ldap Display Name userprofile Minimum MaximumClick Edit to bring up the String Attribute Editor OpenLDAP Server OpenLDAP Server InstallationCustomizing the OpenLDAP Schema OpenLDAP Server ConfigurationStarting the OpenLDAP Server Ldap DIT Design and Ldif FileDIT Creation Using the New SchemaEnable Dial Out Enable Dial BackSecurity Connection Setup Example Windows XPFiltering Login FailuresIP Filtering To delete an IP filterAccount Policy MAC Filtering Login StringEncryption Private Certificate Working ModeCertificate Signing Request Email Address Administrator@yourcompany.comField Example Time Zone Date/TimeNetwork Time Log Notification SettingsLog Information Upgrade Main Firmware MaintenanceMain Firmware Upgrade Recovery Main ScreenSIU Firmware Upgrade Recovery Upgrade AdaptersBackup Backup/RestoreRestore Ping HostDownload Reset on ExitSystem Operation Control Panel Remote Session OperationHotkey Description HotkeysSystem Macros User MacrosRGB Choosing a pre-determined configurationGamma Adjustment User List Panel USB Ports on Front Panel of KVM SwitchCompose Panel Message Display PanelVirtual Media via Remote Session Virtual MediaMac and Linux Considerations Virtual Media via Local ConsoleManual Mouse Synchronization Mouse Synchronization ProceduresWindows Windows XP and laterRemote Session Operation Remote Session Operation Toolbar Hotkeys OSD ToolbarHotkey Action Icon in the ToolbarPanel Array Toolbar Auto Scanning Multiuser OperationLog Server InstallationStarting Up Menu BarAdd ConfigureEdit DeleteEvents MaintenanceSearch Options Contents Network RetryHelp Log Server Main Screen OverviewEvent Panel List PanelRecording They will not be able to communicateAdministration Troubleshooting General Operation TroubleshootingProblem Action AppendixVirtual Media Troubleshooting Mouse TroubleshootingAP Windows Client Troubleshooting Panel Array Mode Troubleshooting WinClient ActiveX Viewer TroubleshootingJava Applet & AP Java Client Troubleshooting Sun Systems Troubleshooting Log Server TroubleshootingFactory Default Settings SpecificationsSetting Default Switch RJ45 Pins Modem DB9Fan Location & Speed Information Temperature Sensor LocationFan Speed Year Limited Warranty Warranty Registration
Related manuals
Manual 4 pages 42.85 Kb

B064-016-02-IPG, B064-032-02-IPG, B064-016-04-IPG, B064-032-04-IPG specifications

The Tripp Lite B064-032-04-IPG is a highly efficient and versatile KVM switch that offers seamless control over multiple computers or servers from a single console. This device is engineered for professionals and IT administrators who require robust management of servers or machines located in different physical locations, particularly in demanding environments like data centers or server rooms.

One of the standout features of the B064-032-04-IPG is its ability to facilitate access to up to 32 computers using a single set of keyboard, video monitor, and mouse. This not only streamlines workflows but also reduces clutter, as users no longer need multiple sets of peripherals for each machine. The switch supports both USB and PS/2 connection types, making it compatible with a wide range of devices.

The B064-032-04-IPG leverages advanced technology to offer a responsive and high-resolution video output, supporting resolutions up to 1920 x 1200. This ensures that users can easily view and interact with multiple systems without sacrificing visual quality. Additionally, the switch features a built-in web interface that allows administrators to configure settings with ease, enabling effective management in remote or local scenarios.

Security is a top priority with the B064-032-04-IPG, which supports user authentication and multi-level password protection. This guarantees that only authorized personnel can access sensitive systems, bolstering the overall security posture of the network. Furthermore, the switch includes features for firmware updates, ensuring that it stays current with the latest security protocols and enhancements.

Another key characteristic of this KVM switch is its support for hot-swappable functionality, which allows users to add or remove servers without needing to power down the entire system. This greatly enhances operational efficiency and minimizes downtime during maintenance or upgrades.

Built with a sturdy and reliable design, the Tripp Lite B064-032-04-IPG is suitable for various environments, including those that require ruggedness and durability. Its compact form factor makes installation straightforward, and its fanless design ensures silent operation, which is ideal for noise-sensitive areas.

In conclusion, the Tripp Lite B064-032-04-IPG is a powerful KVM switch that combines multiple advanced features, technologies, and characteristics, making it an excellent choice for large-scale server management. With its ease of use, security features, and high performance, it provides a seamless solution for IT professionals looking to optimize their hardware management in complex environments.