Tripp Lite B064-032-02-IPG, B064-032-04-IPG Security, Connection Setup Example Windows XP

Page 45

OSD Operation (continued)

OOBC (continued)

Follow the steps below to setup and access the B064-Series KVM Switch via dial-in modem:

1.Set up your hardware configuration to match the diagram below. You will need to use Cat5e cable and the included RJ45 to DB9 Adapter to connect the B064-Series KVM Switch’s modem port to the modem.

2.From your computer, use your modem terminal program to dial into the B064-Series KVM Switch’s modem.

Note: If you don’t know the B064-Series KVM Switch modem’s serial parameters, get them from the system administrator. An example of setting up a modem terminal program under Windows XP is provided on the next page.

3.Once the connection is established, open your browser, and specify 192.168.192.1 in the URL box.

Note: The default username and password are blank.

From here, operation is the same as if you had logged in from a browser or with the AP programs.

Security

The following section describes the settings found in the Security sub- section.

Connection Setup Example (Windows XP)

To set up a dial-in connection to the B064-Series KVM Switch under Windows XP, do the following:

1.From the Start menu, select Control Panel Network Connections Create a New Connection.

2.When the Welcome to the New Connection Wizard dialog box appears, click Next to move on.

3.In the Network Connection Type dialog box, select Connect to the network at my workplace and click Next.

4.In the Network Connection dialog box, select Dial-up connection and click Next.

5.In the Connection Name dialog box, key in a name for the connection and click Next.

6.In the Connection Availability dialog box, you can select either Anyone’s use or My use only, depending on your preferences, then click Next.

Note: If you are the only user on this computer, this dialog box won’t appear.

7.In the Phone Number to dial dialog box, key in the phone number of the modem connected to the B064 Series KVM Switch (be sure to include country and area codes, if necessary), then click Next.

8.In the Completing the New Connection Wizard dialog box, check

Add a shortcut to this connection on my desktop and click Finish.

This completes the connection setup. Double click the desktop shortcut icon to make a dial-in connection to the B064-Series KVM Switch.

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Models NetDirector Cat5 IP KVM SwitchesTable of Contents Features IntroductionRemote Console Computer Requirements Connected Computer/Server Requirements Supported Video ResolutionsServer Interface Units SIUs Supported Operating SystemsComponents Supported BrowsersFront View No.. Component DescriptionRear View General Safety Instructions Hardware SetupRack Mounting Safety Instructions Single-Stage InstallationStacking Rack MountingTwo-Stage Installation Single-Stage Installations Powering Off & RestartingTwo-Stage Installations Hot PluggingFirst Time Setup Super Administrator SetupNetwork Setup IP Address Determination Local ConsoleNIC Settings IP InstallerBrowser Redundant NICLogging Into the B064-Series KVM Switch Changing the Super Administrator LoginLocal Console Login AP Windows Client Login Browser LoginAP Java Client Login Connection ScreenFile Menu OSD Main OSD OperationWeb Browser Main AP Client MainOSD Tab Bar Port AccessLocal Console Main Icon DescriptionConnections Internet ExplorerNon-Windows Browser Port Selection List Panel Array ModePort Naming ScanPort Level HistoryAttribute Description Section DescriptionFavorites Adding a FavoriteModifying a Favorite Disable it. The default setting is enabled Setting DescriptionUser Preferences Scan DurationSessions AccessAccess Port ConfigurationClick until you toggle to the desired setting Virtual media mounted to the selected portPort Property Associated LinkTime. Choices are Exclusive, Occupy and Share Adding User Accounts User ManagementField Description Deleting User Accounts Modifying User AccountsGroups Groups Creating GroupsGroups Modifying Groups Groups Deleting GroupsAssigning Users to Groups Removing Users From a Group via the User’s Notebook Assigning Users to a Group via the User’s NotebookRemoving Users From a Group via the Group’s Notebook Assigning Users to a Group via the Group’s NotebookDevice Assignment Device Management Power Supply DetectionDevice Information OSD Operation for detailsNetwork Operating ModeWhen using them to connect to the KVM switch Advanced Network Management Settings Disable Local Authentication AuthenticationRadius Settings Ldap / Ldaps Authentication and Authorization SettingsInstall the Windows 2003 Support Tools Install the Active Directory Schema Snap-inCreating a Start Menu Shortcut Entry Select New Attribute Extend and Update the Active Directory SchemaCommon Name userprofile Ldap Display Name userprofile Minimum MaximumClick Edit to bring up the String Attribute Editor OpenLDAP Server OpenLDAP Server InstallationCustomizing the OpenLDAP Schema OpenLDAP Server ConfigurationStarting the OpenLDAP Server Ldap DIT Design and Ldif FileDIT Creation Using the New SchemaEnable Dial Out Enable Dial BackSecurity Connection Setup Example Windows XPFiltering Login FailuresIP Filtering To delete an IP filterLogin String Account Policy MAC FilteringEncryption Private Certificate Working ModeEmail Address Administrator@yourcompany.com Certificate Signing RequestField Example Date/Time Time ZoneNetwork Time Notification Settings LogLog Information Upgrade Main Firmware MaintenanceMain Firmware Upgrade Recovery Main ScreenSIU Firmware Upgrade Recovery Upgrade AdaptersBackup Backup/RestoreRestore Ping HostReset on Exit DownloadSystem Operation Control Panel Remote Session OperationHotkey Description HotkeysSystem Macros User MacrosRGB Choosing a pre-determined configurationGamma Adjustment User List Panel USB Ports on Front Panel of KVM SwitchCompose Panel Message Display PanelVirtual Media via Remote Session Virtual MediaMac and Linux Considerations Virtual Media via Local ConsoleManual Mouse Synchronization Mouse Synchronization ProceduresWindows Windows XP and laterRemote Session Operation Remote Session Operation Toolbar Hotkeys OSD ToolbarHotkey Action Icon in the ToolbarPanel Array Toolbar Auto Scanning Multiuser OperationLog Server InstallationStarting Up Menu BarAdd ConfigureEdit DeleteMaintenance EventsSearch Options Contents Network RetryHelp Log Server Main Screen OverviewEvent Panel List PanelRecording They will not be able to communicateAdministration Troubleshooting General Operation TroubleshootingProblem Action AppendixMouse Troubleshooting Virtual Media TroubleshootingAP Windows Client Troubleshooting WinClient ActiveX Viewer Troubleshooting Panel Array Mode TroubleshootingJava Applet & AP Java Client Troubleshooting Sun Systems Troubleshooting Log Server TroubleshootingFactory Default Settings SpecificationsSetting Default Switch RJ45 Pins Modem DB9Temperature Sensor Location Fan Location & Speed InformationFan Speed Year Limited Warranty Warranty Registration
Related manuals
Manual 4 pages 42.85 Kb

B064-016-02-IPG, B064-032-02-IPG, B064-016-04-IPG, B064-032-04-IPG specifications

The Tripp Lite B064-032-04-IPG is a highly efficient and versatile KVM switch that offers seamless control over multiple computers or servers from a single console. This device is engineered for professionals and IT administrators who require robust management of servers or machines located in different physical locations, particularly in demanding environments like data centers or server rooms.

One of the standout features of the B064-032-04-IPG is its ability to facilitate access to up to 32 computers using a single set of keyboard, video monitor, and mouse. This not only streamlines workflows but also reduces clutter, as users no longer need multiple sets of peripherals for each machine. The switch supports both USB and PS/2 connection types, making it compatible with a wide range of devices.

The B064-032-04-IPG leverages advanced technology to offer a responsive and high-resolution video output, supporting resolutions up to 1920 x 1200. This ensures that users can easily view and interact with multiple systems without sacrificing visual quality. Additionally, the switch features a built-in web interface that allows administrators to configure settings with ease, enabling effective management in remote or local scenarios.

Security is a top priority with the B064-032-04-IPG, which supports user authentication and multi-level password protection. This guarantees that only authorized personnel can access sensitive systems, bolstering the overall security posture of the network. Furthermore, the switch includes features for firmware updates, ensuring that it stays current with the latest security protocols and enhancements.

Another key characteristic of this KVM switch is its support for hot-swappable functionality, which allows users to add or remove servers without needing to power down the entire system. This greatly enhances operational efficiency and minimizes downtime during maintenance or upgrades.

Built with a sturdy and reliable design, the Tripp Lite B064-032-04-IPG is suitable for various environments, including those that require ruggedness and durability. Its compact form factor makes installation straightforward, and its fanless design ensures silent operation, which is ideal for noise-sensitive areas.

In conclusion, the Tripp Lite B064-032-04-IPG is a powerful KVM switch that combines multiple advanced features, technologies, and characteristics, making it an excellent choice for large-scale server management. With its ease of use, security features, and high performance, it provides a seamless solution for IT professionals looking to optimize their hardware management in complex environments.
Top Page Image Contents