Tripp Lite B064-016-04-IPG, B064-032-04-IPG, B064-032-02-IPG owner manual Backup/Restore, Ping Host

Page 54

OSD Operation (continued)

Maintenance (continued)

Backup/Restore

The Backup/Restore subsection allows you to backup and restore the KVM switch configuration and user profile information.

Backup

To create a backup of the KVM switch, follow the steps below.

1.Key in a password in the Password field. Note: Setting a password is optional. If you do not wish to use a password, you can skip this step.

2.Click the Backup button.

3.A pop-up appears asking you to save the backup file. Browse to a desired location on your computer to save the file to.

Restore

To restore the KVM switch using a backup file, follow the steps below.

1.Click on the Browse button to the right of the filename field, and then navigate to and select the backup file.

2.If you set up a password when creating the backup file, enter it in the Password field.

3.Select as many of the options that are presented as you wish to restore, and then click the Restore button. Once complete, a message appears to inform you that the procedure succeeded.

Ping Host

The Ping Host subsection lets you check the network status of devices on the KVM installation.

To ping a device, follow the instructions below.

1.Key in the IP address or Host Name of the device into the IP address/Host Name field.

2.Click the Ping button. The ping results will be displayed in the Results section.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents NetDirector Cat5 IP KVM Switches ModelsTable of Contents Features IntroductionRemote Console Computer Requirements Server Interface Units SIUs Supported Video ResolutionsConnected Computer/Server Requirements Supported Operating SystemsFront View Supported BrowsersComponents No.. Component DescriptionRear View Hardware Setup General Safety InstructionsStacking Single-Stage InstallationRack Mounting Safety Instructions Rack MountingTwo-Stage Installation Two-Stage Installations Powering Off & RestartingSingle-Stage Installations Hot PluggingNetwork Setup IP Address Determination Super Administrator SetupFirst Time Setup Local ConsoleBrowser IP InstallerNIC Settings Redundant NICLogging Into the B064-Series KVM Switch Changing the Super Administrator LoginLocal Console Login Browser Login AP Windows Client LoginAP Java Client Login Connection ScreenFile Menu Web Browser Main OSD OperationOSD Main AP Client MainLocal Console Main Port AccessOSD Tab Bar Icon DescriptionConnections Internet ExplorerNon-Windows Browser Port Naming Panel Array ModePort Selection List ScanAttribute Description HistoryPort Level Section DescriptionFavorites Adding a FavoriteModifying a Favorite User Preferences Setting DescriptionDisable it. The default setting is enabled Scan DurationAccess SessionsClick until you toggle to the desired setting Port ConfigurationAccess Virtual media mounted to the selected portPort Property Associated LinkTime. Choices are Exclusive, Occupy and Share User Management Adding User AccountsField Description Groups Modifying User AccountsDeleting User Accounts Groups Creating GroupsGroups Modifying Groups Groups Deleting GroupsAssigning Users to Groups Assigning Users to a Group via the User’s Notebook Removing Users From a Group via the User’s NotebookAssigning Users to a Group via the Group’s Notebook Removing Users From a Group via the Group’s NotebookDevice Assignment Device Information Power Supply DetectionDevice Management OSD Operation for detailsOperating Mode NetworkWhen using them to connect to the KVM switch Advanced Network Management Settings Radius Settings AuthenticationDisable Local Authentication Ldap / Ldaps Authentication and Authorization SettingsInstall the Windows 2003 Support Tools Install the Active Directory Schema Snap-inCreating a Start Menu Shortcut Entry Common Name userprofile Ldap Display Name userprofile Extend and Update the Active Directory SchemaSelect New Attribute Minimum MaximumClick Edit to bring up the String Attribute Editor OpenLDAP Server Installation OpenLDAP ServerStarting the OpenLDAP Server OpenLDAP Server ConfigurationCustomizing the OpenLDAP Schema Ldap DIT Design and Ldif FileUsing the New Schema DIT CreationEnable Dial Back Enable Dial OutConnection Setup Example Windows XP SecurityIP Filtering Login FailuresFiltering To delete an IP filterLogin String Account Policy MAC FilteringEncryption Working Mode Private CertificateEmail Address Administrator@yourcompany.com Certificate Signing RequestField Example Date/Time Time ZoneNetwork Time Notification Settings LogLog Information Main Firmware Upgrade Recovery MaintenanceUpgrade Main Firmware Main ScreenUpgrade Adapters SIU Firmware Upgrade RecoveryRestore Backup/RestoreBackup Ping HostReset on Exit DownloadSystem Operation Remote Session Operation Control PanelHotkeys Hotkey DescriptionUser Macros System MacrosChoosing a pre-determined configuration RGBGamma Adjustment Compose Panel USB Ports on Front Panel of KVM SwitchUser List Panel Message Display PanelVirtual Media Virtual Media via Remote SessionVirtual Media via Local Console Mac and Linux ConsiderationsWindows Mouse Synchronization ProceduresManual Mouse Synchronization Windows XP and laterRemote Session Operation Remote Session Operation Hotkey Action OSD ToolbarToolbar Hotkeys Icon in the ToolbarPanel Array Toolbar Multiuser Operation Auto ScanningStarting Up InstallationLog Server Menu BarEdit ConfigureAdd DeleteMaintenance EventsSearch Help Contents Network RetryOptions Log Server Main Screen OverviewRecording List PanelEvent Panel They will not be able to communicateProblem Action General Operation TroubleshootingAdministration Troubleshooting AppendixMouse Troubleshooting Virtual Media TroubleshootingAP Windows Client Troubleshooting WinClient ActiveX Viewer Troubleshooting Panel Array Mode TroubleshootingJava Applet & AP Java Client Troubleshooting Log Server Troubleshooting Sun Systems TroubleshootingSetting Default SpecificationsFactory Default Settings Switch RJ45 Pins Modem DB9Temperature Sensor Location Fan Location & Speed InformationFan Speed Warranty Registration Year Limited Warranty
Related manuals
Manual 4 pages 42.85 Kb

B064-016-02-IPG, B064-032-02-IPG, B064-016-04-IPG, B064-032-04-IPG specifications

The Tripp Lite B064-032-04-IPG is a highly efficient and versatile KVM switch that offers seamless control over multiple computers or servers from a single console. This device is engineered for professionals and IT administrators who require robust management of servers or machines located in different physical locations, particularly in demanding environments like data centers or server rooms.

One of the standout features of the B064-032-04-IPG is its ability to facilitate access to up to 32 computers using a single set of keyboard, video monitor, and mouse. This not only streamlines workflows but also reduces clutter, as users no longer need multiple sets of peripherals for each machine. The switch supports both USB and PS/2 connection types, making it compatible with a wide range of devices.

The B064-032-04-IPG leverages advanced technology to offer a responsive and high-resolution video output, supporting resolutions up to 1920 x 1200. This ensures that users can easily view and interact with multiple systems without sacrificing visual quality. Additionally, the switch features a built-in web interface that allows administrators to configure settings with ease, enabling effective management in remote or local scenarios.

Security is a top priority with the B064-032-04-IPG, which supports user authentication and multi-level password protection. This guarantees that only authorized personnel can access sensitive systems, bolstering the overall security posture of the network. Furthermore, the switch includes features for firmware updates, ensuring that it stays current with the latest security protocols and enhancements.

Another key characteristic of this KVM switch is its support for hot-swappable functionality, which allows users to add or remove servers without needing to power down the entire system. This greatly enhances operational efficiency and minimizes downtime during maintenance or upgrades.

Built with a sturdy and reliable design, the Tripp Lite B064-032-04-IPG is suitable for various environments, including those that require ruggedness and durability. Its compact form factor makes installation straightforward, and its fanless design ensures silent operation, which is ideal for noise-sensitive areas.

In conclusion, the Tripp Lite B064-032-04-IPG is a powerful KVM switch that combines multiple advanced features, technologies, and characteristics, making it an excellent choice for large-scale server management. With its ease of use, security features, and high performance, it provides a seamless solution for IT professionals looking to optimize their hardware management in complex environments.
Top Page Image Contents