Tripp Lite B064-032-04-IPG Manual Mouse Synchronization, Windows XP and later, Sun / Linux

Page 64

Remote Session Operation (continued)

Control Panel (continued)

Manual Mouse Synchronization

If the local mouse pointer goes out of sync with the remote system’s mouse pointer, there are a number of methods to bring them back into sync.

Before trying any mouse synchronization procedures, it is always a good idea to ensure that you go to your Mouse Properties Settings and set them according to the instructions that follow. The Mouse Properties Settings should be set on the computers attached to the B064-Series KVM Switch, not the computer you are using to access it. Note: In order for the local and remote mice to synchronize, you must use the generic mouse driver supplied with the MS operating system. If you have a third party driver installed - such as one supplied by the mouse manufacturer - you must remove it.

Windows 2000:

1.Open the Mouse Properties dialog box

2.Click the Motion tab

3.Set the mouse speed to the middle position (6 units in from the left)

4.Set the mouse acceleration to None

Windows XP and later:

1.Open the Mouse Properties dialog box

2.Click the Pointer Options tab

3.Set the mouse speed to the middle position (6 units in from the left)

4.Disable Enhance Pointer Precision

Sun / Linux:

Open a terminal session and issue the following command: Sun: xset m 1

Linux: xset m 0

Mouse Synchronization Procedures

If you are having syncing problems after adjusting the mouse properties, try the following methods to help synchronize the local and remote mouse pointers. Note: Mouse synchronization may require several seconds to take effect. Wait for 15 to 30 seconds to ensure that the mouse has had enough time to sync.

•When in a remote session, move the mouse pointer to the upper- center of the screen to open the control panel, and then move it back into the remote screen. The mouse pointers should align.

•Click the Video Auto Sync icon in the control panel. In most cases, the local and remote mouse pointers will sync following the video auto sync.

•Invoke the Adjust Mouse hotkey command (see Hotkeys section under Control Panel for details). This hotkey command defaults at F8, F7, F6.

•Adjust the video settings to decrease the amount of information being transferred over the network. The less data that is being sent, the faster the response time. In particular, the Quality and Detect Tolerance settings in the Video Settings screen (see Video Settings section under Control Panel for details) can help improve keyboard and mouse response time.

•Go to the Network page in the OSD and reduce the Network Transfer Rate setting. (See Network section under Device Management in OSD Operation for details.)

•Go to the display settings section of the remote computer and lower the video resolution, refresh rate and color settings.

•If the remote computer has a graphic desktop background, change it to a solid color background.

64

Page 63 Page 65
Image 64
Page 63 Page 65
Contents NetDirector Cat5 IP KVM Switches ModelsTable of Contents Introduction FeaturesRemote Console Computer Requirements Supported Video Resolutions Connected Computer/Server RequirementsServer Interface Units SIUs Supported Operating SystemsSupported Browsers ComponentsFront View No.. Component DescriptionRear View Hardware Setup General Safety InstructionsSingle-Stage Installation Rack Mounting Safety InstructionsStacking Rack MountingTwo-Stage Installation Powering Off & Restarting Single-Stage InstallationsTwo-Stage Installations Hot PluggingSuper Administrator Setup First Time SetupNetwork Setup IP Address Determination Local ConsoleIP Installer NIC SettingsBrowser Redundant NICChanging the Super Administrator Login Logging Into the B064-Series KVM SwitchLocal Console Login Browser Login AP Windows Client LoginConnection Screen AP Java Client LoginFile Menu OSD Operation OSD MainWeb Browser Main AP Client MainPort Access OSD Tab BarLocal Console Main Icon DescriptionInternet Explorer ConnectionsNon-Windows Browser Panel Array Mode Port Selection ListPort Naming ScanHistory Port LevelAttribute Description Section DescriptionAdding a Favorite FavoritesModifying a Favorite Setting Description Disable it. The default setting is enabledUser Preferences Scan DurationAccess SessionsPort Configuration AccessClick until you toggle to the desired setting Virtual media mounted to the selected portAssociated Link Port PropertyTime. Choices are Exclusive, Occupy and Share User Management Adding User AccountsField Description Modifying User Accounts Deleting User AccountsGroups Groups Creating GroupsGroups Deleting Groups Groups Modifying GroupsAssigning Users to Groups Assigning Users to a Group via the User’s Notebook Removing Users From a Group via the User’s NotebookAssigning Users to a Group via the Group’s Notebook Removing Users From a Group via the Group’s NotebookDevice Assignment Power Supply Detection Device ManagementDevice Information OSD Operation for detailsOperating Mode NetworkWhen using them to connect to the KVM switch Advanced Network Management Settings Authentication Disable Local AuthenticationRadius Settings Ldap / Ldaps Authentication and Authorization SettingsInstall the Active Directory Schema Snap-in Install the Windows 2003 Support ToolsCreating a Start Menu Shortcut Entry Extend and Update the Active Directory Schema Select New AttributeCommon Name userprofile Ldap Display Name userprofile Minimum MaximumClick Edit to bring up the String Attribute Editor OpenLDAP Server Installation OpenLDAP ServerOpenLDAP Server Configuration Customizing the OpenLDAP SchemaStarting the OpenLDAP Server Ldap DIT Design and Ldif FileUsing the New Schema DIT CreationEnable Dial Back Enable Dial OutConnection Setup Example Windows XP SecurityLogin Failures FilteringIP Filtering To delete an IP filterAccount Policy MAC Filtering Login StringEncryption Working Mode Private CertificateCertificate Signing Request Email Address Administrator@yourcompany.comField Example Time Zone Date/TimeNetwork Time Log Notification SettingsLog Information Maintenance Upgrade Main FirmwareMain Firmware Upgrade Recovery Main ScreenUpgrade Adapters SIU Firmware Upgrade RecoveryBackup/Restore BackupRestore Ping HostDownload Reset on ExitSystem Operation Remote Session Operation Control PanelHotkeys Hotkey DescriptionUser Macros System MacrosChoosing a pre-determined configuration RGBGamma Adjustment USB Ports on Front Panel of KVM Switch User List PanelCompose Panel Message Display PanelVirtual Media Virtual Media via Remote SessionVirtual Media via Local Console Mac and Linux ConsiderationsMouse Synchronization Procedures Manual Mouse SynchronizationWindows Windows XP and laterRemote Session Operation Remote Session Operation OSD Toolbar Toolbar HotkeysHotkey Action Icon in the ToolbarPanel Array Toolbar Multiuser Operation Auto ScanningInstallation Log ServerStarting Up Menu BarConfigure AddEdit DeleteEvents MaintenanceSearch Contents Network Retry OptionsHelp Log Server Main Screen OverviewList Panel Event PanelRecording They will not be able to communicateGeneral Operation Troubleshooting Administration TroubleshootingProblem Action AppendixVirtual Media Troubleshooting Mouse TroubleshootingAP Windows Client Troubleshooting Panel Array Mode Troubleshooting WinClient ActiveX Viewer TroubleshootingJava Applet & AP Java Client Troubleshooting Log Server Troubleshooting Sun Systems TroubleshootingSpecifications Factory Default SettingsSetting Default Switch RJ45 Pins Modem DB9Fan Location & Speed Information Temperature Sensor LocationFan Speed Warranty Registration Year Limited Warranty
Related manuals
Manual 4 pages 42.85 Kb

B064-016-02-IPG, B064-032-02-IPG, B064-016-04-IPG, B064-032-04-IPG specifications

The Tripp Lite B064-032-04-IPG is a highly efficient and versatile KVM switch that offers seamless control over multiple computers or servers from a single console. This device is engineered for professionals and IT administrators who require robust management of servers or machines located in different physical locations, particularly in demanding environments like data centers or server rooms.

One of the standout features of the B064-032-04-IPG is its ability to facilitate access to up to 32 computers using a single set of keyboard, video monitor, and mouse. This not only streamlines workflows but also reduces clutter, as users no longer need multiple sets of peripherals for each machine. The switch supports both USB and PS/2 connection types, making it compatible with a wide range of devices.

The B064-032-04-IPG leverages advanced technology to offer a responsive and high-resolution video output, supporting resolutions up to 1920 x 1200. This ensures that users can easily view and interact with multiple systems without sacrificing visual quality. Additionally, the switch features a built-in web interface that allows administrators to configure settings with ease, enabling effective management in remote or local scenarios.

Security is a top priority with the B064-032-04-IPG, which supports user authentication and multi-level password protection. This guarantees that only authorized personnel can access sensitive systems, bolstering the overall security posture of the network. Furthermore, the switch includes features for firmware updates, ensuring that it stays current with the latest security protocols and enhancements.

Another key characteristic of this KVM switch is its support for hot-swappable functionality, which allows users to add or remove servers without needing to power down the entire system. This greatly enhances operational efficiency and minimizes downtime during maintenance or upgrades.

Built with a sturdy and reliable design, the Tripp Lite B064-032-04-IPG is suitable for various environments, including those that require ruggedness and durability. Its compact form factor makes installation straightforward, and its fanless design ensures silent operation, which is ideal for noise-sensitive areas.

In conclusion, the Tripp Lite B064-032-04-IPG is a powerful KVM switch that combines multiple advanced features, technologies, and characteristics, making it an excellent choice for large-scale server management. With its ease of use, security features, and high performance, it provides a seamless solution for IT professionals looking to optimize their hardware management in complex environments.
Top Page Image Contents