Tripp Lite B064-032-04-IPG, B064-032-02-IPG, B064-016-04-IPG Working Mode, Private Certificate

Page 48

OSD Operation (continued)

Security (continued)

Working Mode

The Working Mode section allows you to enable/disable operation features of the KVM switch. The table below describes the available settings.

Setting

Description

 

 

Enable ICMP

When this box is checked, the KVM switch can be pinged. If it is not checked, the KVM cannot be pinged.

 

 

Enable Multiuser Operation

When this box is checked, multiple accounts (up to 32) can log onto the same bus (see Bus Info section under

 

Control Panel in Remote Session Operation for details) at the same time. If not selected, the KVM switch can only

 

be simultaneously accessed by the number of users that the unit has buses for. The B064-016-02-IPG and B064-

 

032-02-IPG have 3 buses each (1 local, 2 remote), and the B064-016-04-IPG and B064-032-04-IPG have 5 buses

 

each (1 local, 4 remote).

 

 

Enable Virtual Media Write

When this box is checked, applicable virtual media (see Virtual Media section under Control Panel in Remote

Operation

Session Operation for details) will be able to have information written to it from the remote computer. If this box is not

 

checked, any virtual media mounted to a remote computer will only be able to be viewed, and not written to.

 

 

Enable Local Virtual Media

When this box is checked, applicable USB media (see Virtual Media section under Control Panel in Remote Session

 

Operation for details) can be connected to the USB ports on the front of the KVM switch and accessed on the

 

connected computers. If this box is not checked, USB media connected to the KVM will not be accessible on the

 

connected computers.

Browser Service

When this box is checked, browser access to the KVM switch can be limited by selecting one of the three options in

 

the drop-down menu.

 

Disable Browser – Browser access is disabled completely.

 

Disable HTTP – Browser access is permitted, but only when using a HTTPS URL.

 

Disable HTTPS – Browser access is permitted, but only when using a HTTP URL.

Disable Authentication

When this box is checked, no authentication procedures are used to check accounts logging into the KVM. All users

 

will be logged onto the KVM switch with full access, regardless of what account type they are. Note: Enabling this

 

setting creates a very unsecure situation, and is not recommended.

 

 

Private Certificate

When logging into the KVM switch over a secure (SSL) connection, a certificate is required to ensure you are logging into a secure site. If a certificate is not recognized as secure, you will be prompted each time you log in to verify you want to continue to the website. This section allows you to import an Encryption Key and Certificate. To import an Encryption Key and Certificate, follow the steps below.

1.Click the Browse button to the right of Private Key, browse to where your private encryption key file is located, and then select it.

2.Click the Browse button to the right of Certificate, browse to where your certificate file is located, and then select it.

3.Click the Upload button to complete the procedure. Note: Both the Private Key and Certificate must be imported at the same time. Clicking the Restore Default button returns the KVM to the default certificate that came installed on it.

48

Image 48
Contents NetDirector Cat5 IP KVM Switches ModelsTable of Contents Features IntroductionRemote Console Computer Requirements Supported Video Resolutions Connected Computer/Server RequirementsServer Interface Units SIUs Supported Operating SystemsSupported Browsers ComponentsFront View No.. Component DescriptionRear View Hardware Setup General Safety InstructionsSingle-Stage Installation Rack Mounting Safety InstructionsStacking Rack MountingTwo-Stage Installation Powering Off & Restarting Single-Stage InstallationsTwo-Stage Installations Hot PluggingSuper Administrator Setup First Time SetupNetwork Setup IP Address Determination Local ConsoleIP Installer NIC SettingsBrowser Redundant NICLogging Into the B064-Series KVM Switch Changing the Super Administrator LoginLocal Console Login Browser Login AP Windows Client LoginAP Java Client Login Connection ScreenFile Menu OSD Operation OSD MainWeb Browser Main AP Client MainPort Access OSD Tab BarLocal Console Main Icon DescriptionConnections Internet ExplorerNon-Windows Browser Panel Array Mode Port Selection ListPort Naming ScanHistory Port LevelAttribute Description Section DescriptionFavorites Adding a FavoriteModifying a Favorite Setting Description Disable it. The default setting is enabledUser Preferences Scan DurationAccess SessionsPort Configuration AccessClick until you toggle to the desired setting Virtual media mounted to the selected portPort Property Associated LinkTime. Choices are Exclusive, Occupy and Share User Management Adding User AccountsField Description Modifying User Accounts Deleting User AccountsGroups Groups Creating GroupsGroups Modifying Groups Groups Deleting GroupsAssigning Users to Groups Assigning Users to a Group via the User’s Notebook Removing Users From a Group via the User’s NotebookAssigning Users to a Group via the Group’s Notebook Removing Users From a Group via the Group’s NotebookDevice Assignment Power Supply Detection Device ManagementDevice Information OSD Operation for detailsOperating Mode NetworkWhen using them to connect to the KVM switch Advanced Network Management Settings Authentication Disable Local AuthenticationRadius Settings Ldap / Ldaps Authentication and Authorization SettingsInstall the Windows 2003 Support Tools Install the Active Directory Schema Snap-inCreating a Start Menu Shortcut Entry Extend and Update the Active Directory Schema Select New AttributeCommon Name userprofile Ldap Display Name userprofile Minimum MaximumClick Edit to bring up the String Attribute Editor OpenLDAP Server Installation OpenLDAP ServerOpenLDAP Server Configuration Customizing the OpenLDAP SchemaStarting the OpenLDAP Server Ldap DIT Design and Ldif FileUsing the New Schema DIT CreationEnable Dial Back Enable Dial OutConnection Setup Example Windows XP SecurityLogin Failures FilteringIP Filtering To delete an IP filterLogin String Account Policy MAC FilteringEncryption Working Mode Private CertificateEmail Address Administrator@yourcompany.com Certificate Signing RequestField Example Date/Time Time ZoneNetwork Time Notification Settings LogLog Information Maintenance Upgrade Main FirmwareMain Firmware Upgrade Recovery Main ScreenUpgrade Adapters SIU Firmware Upgrade RecoveryBackup/Restore BackupRestore Ping HostReset on Exit DownloadSystem Operation Remote Session Operation Control PanelHotkeys Hotkey DescriptionUser Macros System MacrosChoosing a pre-determined configuration RGBGamma Adjustment USB Ports on Front Panel of KVM Switch User List PanelCompose Panel Message Display PanelVirtual Media Virtual Media via Remote SessionVirtual Media via Local Console Mac and Linux ConsiderationsMouse Synchronization Procedures Manual Mouse SynchronizationWindows Windows XP and laterRemote Session Operation Remote Session Operation OSD Toolbar Toolbar HotkeysHotkey Action Icon in the ToolbarPanel Array Toolbar Multiuser Operation Auto ScanningInstallation Log ServerStarting Up Menu BarConfigure AddEdit DeleteMaintenance EventsSearch Contents Network Retry OptionsHelp Log Server Main Screen OverviewList Panel Event PanelRecording They will not be able to communicateGeneral Operation Troubleshooting Administration TroubleshootingProblem Action AppendixMouse Troubleshooting Virtual Media TroubleshootingAP Windows Client Troubleshooting WinClient ActiveX Viewer Troubleshooting Panel Array Mode TroubleshootingJava Applet & AP Java Client Troubleshooting Log Server Troubleshooting Sun Systems TroubleshootingSpecifications Factory Default SettingsSetting Default Switch RJ45 Pins Modem DB9Temperature Sensor Location Fan Location & Speed InformationFan Speed Warranty Registration Year Limited Warranty
Related manuals
Manual 4 pages 42.85 Kb

B064-016-02-IPG, B064-032-02-IPG, B064-016-04-IPG, B064-032-04-IPG specifications

The Tripp Lite B064-032-04-IPG is a highly efficient and versatile KVM switch that offers seamless control over multiple computers or servers from a single console. This device is engineered for professionals and IT administrators who require robust management of servers or machines located in different physical locations, particularly in demanding environments like data centers or server rooms.

One of the standout features of the B064-032-04-IPG is its ability to facilitate access to up to 32 computers using a single set of keyboard, video monitor, and mouse. This not only streamlines workflows but also reduces clutter, as users no longer need multiple sets of peripherals for each machine. The switch supports both USB and PS/2 connection types, making it compatible with a wide range of devices.

The B064-032-04-IPG leverages advanced technology to offer a responsive and high-resolution video output, supporting resolutions up to 1920 x 1200. This ensures that users can easily view and interact with multiple systems without sacrificing visual quality. Additionally, the switch features a built-in web interface that allows administrators to configure settings with ease, enabling effective management in remote or local scenarios.

Security is a top priority with the B064-032-04-IPG, which supports user authentication and multi-level password protection. This guarantees that only authorized personnel can access sensitive systems, bolstering the overall security posture of the network. Furthermore, the switch includes features for firmware updates, ensuring that it stays current with the latest security protocols and enhancements.

Another key characteristic of this KVM switch is its support for hot-swappable functionality, which allows users to add or remove servers without needing to power down the entire system. This greatly enhances operational efficiency and minimizes downtime during maintenance or upgrades.

Built with a sturdy and reliable design, the Tripp Lite B064-032-04-IPG is suitable for various environments, including those that require ruggedness and durability. Its compact form factor makes installation straightforward, and its fanless design ensures silent operation, which is ideal for noise-sensitive areas.

In conclusion, the Tripp Lite B064-032-04-IPG is a powerful KVM switch that combines multiple advanced features, technologies, and characteristics, making it an excellent choice for large-scale server management. With its ease of use, security features, and high performance, it provides a seamless solution for IT professionals looking to optimize their hardware management in complex environments.