Tripp Lite B064-016-04-IPG, B064-032-04-IPG, B064-032-02-IPG Virtual Media via Remote Session

Page 62

Remote Session Operation (continued)

Control Panel (continued)

Virtual Media

Virtual Media via Remote Session

When accessing a connected computer remotely, you can use media from the computer you are accessing the KVM switch with on the remote computer. You are also able to access media connected to the USB ports on the front of the KVM switch; however, media connected to these ports needs to be mounted via the local console. (See Virtual Media via Local Console section under Control Panel in Remote Session Operation for details.) To access virtual media via remote session, follow the instructions below. Note: When accessing the KVM remotely with a Windows Vista or 7 computer, you must run Internet Explorer as an administrator for virtual media to function properly.

1.Click the Virtual Media icon on the control panel to bring up the following screen.

Note: The T button in the upper-right corner brings up a slider bar that allows you to adjust the transparency of the virtual media screen. When you’re finished making an adjustment, simply click anywhere on the screen to close the slider bar.

2.Click the Add button and then select the desired media from the list of media sources that appears. Each selected media source will allow you to choose the available drive, file, folder or removable disk.

Note: If your media source is USB 1.1, check the Disable High Speed USB Operation Mode checkbox.

3.Repeat this step to add as many media sources as you want to the Virtual Media screen. To remove a media source from the list, highlight it and click the Remove button. Note: Only 3 media sources can be used at any one time, with the top 3 sources in the list being the active devices. To rearrange the device order, highlight the desired device and use the arrow keys on the right of the screen to move the device up or down in the list.

4.Some media sources are Read Only, whereas others are Read/ Write. Those that are Read/Write can be viewed on the remote computer, and can have data from the remote computer added to them. Those that are Read Only can only be viewed. Read Only media sources will be grayed out in the list, not allowing you to check the Enable Write checkbox to the left of the source. Read/ Write sources will not be grayed out, and you will be able to decide whether data can be added to them or not. By default, Read/Write sources are displayed with the Enable Write checkbox unchecked, which means that data cannot be added to them. To allow data from the remote computer to be added to a media source, simply check the Enable Write checkbox to the left of it in the list.

5.Once all media sources are added, and the desired 3 media sources are at the top of the list, click the Mount button to close the dialog box and open the media sources on the remote computer. Note:

Depending on the speed of your network and the size of the media source, it may take 30 seconds or so for the dialog box to close and the media to open on the remote computer.

6.To disconnect the media sources from the remote computer, click on the Virtual Media icon in the control panel.

62

Image 62
Contents NetDirector Cat5 IP KVM Switches ModelsTable of Contents Remote Console Computer Requirements FeaturesIntroduction Server Interface Units SIUs Supported Video ResolutionsConnected Computer/Server Requirements Supported Operating SystemsFront View Supported BrowsersComponents No.. Component DescriptionRear View Hardware Setup General Safety InstructionsStacking Single-Stage InstallationRack Mounting Safety Instructions Rack MountingTwo-Stage Installation Two-Stage Installations Powering Off & RestartingSingle-Stage Installations Hot PluggingNetwork Setup IP Address Determination Super Administrator SetupFirst Time Setup Local ConsoleBrowser IP InstallerNIC Settings Redundant NICLocal Console Login Logging Into the B064-Series KVM SwitchChanging the Super Administrator Login Browser Login AP Windows Client LoginFile Menu AP Java Client LoginConnection Screen Web Browser Main OSD OperationOSD Main AP Client MainLocal Console Main Port AccessOSD Tab Bar Icon DescriptionNon-Windows Browser ConnectionsInternet Explorer Port Naming Panel Array ModePort Selection List ScanAttribute Description HistoryPort Level Section DescriptionModifying a Favorite FavoritesAdding a Favorite User Preferences Setting DescriptionDisable it. The default setting is enabled Scan DurationAccess SessionsClick until you toggle to the desired setting Port ConfigurationAccess Virtual media mounted to the selected portTime. Choices are Exclusive, Occupy and Share Port PropertyAssociated Link User Management Adding User AccountsField Description Groups Modifying User AccountsDeleting User Accounts Groups Creating GroupsAssigning Users to Groups Groups Modifying GroupsGroups Deleting Groups Assigning Users to a Group via the User’s Notebook Removing Users From a Group via the User’s NotebookAssigning Users to a Group via the Group’s Notebook Removing Users From a Group via the Group’s NotebookDevice Assignment Device Information Power Supply DetectionDevice Management OSD Operation for detailsOperating Mode NetworkWhen using them to connect to the KVM switch Advanced Network Management Settings Radius Settings AuthenticationDisable Local Authentication Ldap / Ldaps Authentication and Authorization SettingsCreating a Start Menu Shortcut Entry Install the Windows 2003 Support ToolsInstall the Active Directory Schema Snap-in Common Name userprofile Ldap Display Name userprofile Extend and Update the Active Directory SchemaSelect New Attribute Minimum MaximumClick Edit to bring up the String Attribute Editor OpenLDAP Server Installation OpenLDAP ServerStarting the OpenLDAP Server OpenLDAP Server ConfigurationCustomizing the OpenLDAP Schema Ldap DIT Design and Ldif FileUsing the New Schema DIT CreationEnable Dial Back Enable Dial OutConnection Setup Example Windows XP SecurityIP Filtering Login FailuresFiltering To delete an IP filterEncryption Login StringAccount Policy MAC Filtering Working Mode Private CertificateField Example Email Address Administrator@yourcompany.comCertificate Signing Request Network Time Date/TimeTime Zone Log Information Notification SettingsLog Main Firmware Upgrade Recovery MaintenanceUpgrade Main Firmware Main ScreenUpgrade Adapters SIU Firmware Upgrade RecoveryRestore Backup/RestoreBackup Ping HostSystem Operation Reset on ExitDownload Remote Session Operation Control PanelHotkeys Hotkey DescriptionUser Macros System MacrosChoosing a pre-determined configuration RGBGamma Adjustment Compose Panel USB Ports on Front Panel of KVM SwitchUser List Panel Message Display PanelVirtual Media Virtual Media via Remote SessionVirtual Media via Local Console Mac and Linux ConsiderationsWindows Mouse Synchronization ProceduresManual Mouse Synchronization Windows XP and laterRemote Session Operation Remote Session Operation Hotkey Action OSD ToolbarToolbar Hotkeys Icon in the ToolbarPanel Array Toolbar Multiuser Operation Auto ScanningStarting Up InstallationLog Server Menu BarEdit ConfigureAdd DeleteSearch MaintenanceEvents Help Contents Network RetryOptions Log Server Main Screen OverviewRecording List PanelEvent Panel They will not be able to communicateProblem Action General Operation TroubleshootingAdministration Troubleshooting AppendixAP Windows Client Troubleshooting Mouse TroubleshootingVirtual Media Troubleshooting Java Applet & AP Java Client Troubleshooting WinClient ActiveX Viewer TroubleshootingPanel Array Mode Troubleshooting Log Server Troubleshooting Sun Systems TroubleshootingSetting Default SpecificationsFactory Default Settings Switch RJ45 Pins Modem DB9Fan Speed Temperature Sensor LocationFan Location & Speed Information Warranty Registration Year Limited Warranty
Related manuals
Manual 4 pages 42.85 Kb

B064-016-02-IPG, B064-032-02-IPG, B064-016-04-IPG, B064-032-04-IPG specifications

The Tripp Lite B064-032-04-IPG is a highly efficient and versatile KVM switch that offers seamless control over multiple computers or servers from a single console. This device is engineered for professionals and IT administrators who require robust management of servers or machines located in different physical locations, particularly in demanding environments like data centers or server rooms.

One of the standout features of the B064-032-04-IPG is its ability to facilitate access to up to 32 computers using a single set of keyboard, video monitor, and mouse. This not only streamlines workflows but also reduces clutter, as users no longer need multiple sets of peripherals for each machine. The switch supports both USB and PS/2 connection types, making it compatible with a wide range of devices.

The B064-032-04-IPG leverages advanced technology to offer a responsive and high-resolution video output, supporting resolutions up to 1920 x 1200. This ensures that users can easily view and interact with multiple systems without sacrificing visual quality. Additionally, the switch features a built-in web interface that allows administrators to configure settings with ease, enabling effective management in remote or local scenarios.

Security is a top priority with the B064-032-04-IPG, which supports user authentication and multi-level password protection. This guarantees that only authorized personnel can access sensitive systems, bolstering the overall security posture of the network. Furthermore, the switch includes features for firmware updates, ensuring that it stays current with the latest security protocols and enhancements.

Another key characteristic of this KVM switch is its support for hot-swappable functionality, which allows users to add or remove servers without needing to power down the entire system. This greatly enhances operational efficiency and minimizes downtime during maintenance or upgrades.

Built with a sturdy and reliable design, the Tripp Lite B064-032-04-IPG is suitable for various environments, including those that require ruggedness and durability. Its compact form factor makes installation straightforward, and its fanless design ensures silent operation, which is ideal for noise-sensitive areas.

In conclusion, the Tripp Lite B064-032-04-IPG is a powerful KVM switch that combines multiple advanced features, technologies, and characteristics, making it an excellent choice for large-scale server management. With its ease of use, security features, and high performance, it provides a seamless solution for IT professionals looking to optimize their hardware management in complex environments.