Tripp Lite B064-016-02-IPG, B064-032-04-IPG Assigning Users to a Group via the Group’s Notebook

Page 31

OSD Operation (continued)

User Management (continued)

Assigning Users to a Group via the Group’s Notebook

To assign a user to a group from the Group notebook, do the following:

1.Select the group’s name in the Group list or select the group’s name in the Main Panel and click Modify.

2.When the group’s notebook appears, select the Members tab. A screen similar to the one below appears:

3.In the Available column, select the user that you want to add to the group.

Note: Super Administrators will not show up in the Available list, as they already have access to the entire installation and cannot be added to a group.

4.Click the Right Arrow to put the user’s name into the Selected column.

5.Repeat the above for any other users that you want to add to the group.

6.Click Save when you are done.

Removing Users From a Group via the Group’s Notebook

To remove a user from a group via the Group’s notebook, do the following:

1.Select the group’s name in the Group list or select the group’s name in the Main Panel and click Modify.

2.When the group’s notebook appears, select the Members tab. A screen similar to the one below appears:

3.In the Selected column, select the user that you want to remove from the group.

4.Click the Left Arrow to remove the user’s name from the Selected column and send it back to the Available column.

5.Repeat the above for any other users that you want to remove from the group.

6.Click Save when finished.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Models NetDirector Cat5 IP KVM SwitchesTable of Contents Introduction FeaturesRemote Console Computer Requirements Supported Operating Systems Supported Video ResolutionsConnected Computer/Server Requirements Server Interface Units SIUsNo.. Component Description Supported BrowsersComponents Front ViewRear View General Safety Instructions Hardware SetupRack Mounting Single-Stage InstallationRack Mounting Safety Instructions StackingTwo-Stage Installation Hot Plugging Powering Off & RestartingSingle-Stage Installations Two-Stage InstallationsLocal Console Super Administrator SetupFirst Time Setup Network Setup IP Address DeterminationRedundant NIC IP InstallerNIC Settings BrowserChanging the Super Administrator Login Logging Into the B064-Series KVM SwitchLocal Console Login AP Windows Client Login Browser LoginConnection Screen AP Java Client LoginFile Menu AP Client Main OSD OperationOSD Main Web Browser MainIcon Description Port AccessOSD Tab Bar Local Console MainInternet Explorer ConnectionsNon-Windows Browser Scan Panel Array ModePort Selection List Port NamingSection Description HistoryPort Level Attribute DescriptionAdding a Favorite FavoritesModifying a Favorite Scan Duration Setting DescriptionDisable it. The default setting is enabled User PreferencesSessions AccessVirtual media mounted to the selected port Port ConfigurationAccess Click until you toggle to the desired settingAssociated Link Port PropertyTime. Choices are Exclusive, Occupy and Share Adding User Accounts User ManagementField Description Groups Creating Groups Modifying User AccountsDeleting User Accounts GroupsGroups Deleting Groups Groups Modifying GroupsAssigning Users to Groups Removing Users From a Group via the User’s Notebook Assigning Users to a Group via the User’s NotebookRemoving Users From a Group via the Group’s Notebook Assigning Users to a Group via the Group’s NotebookDevice Assignment OSD Operation for details Power Supply DetectionDevice Management Device InformationNetwork Operating ModeWhen using them to connect to the KVM switch Advanced Network Management Settings Ldap / Ldaps Authentication and Authorization Settings AuthenticationDisable Local Authentication Radius SettingsInstall the Active Directory Schema Snap-in Install the Windows 2003 Support ToolsCreating a Start Menu Shortcut Entry Minimum Maximum Extend and Update the Active Directory SchemaSelect New Attribute Common Name userprofile Ldap Display Name userprofileClick Edit to bring up the String Attribute Editor OpenLDAP Server OpenLDAP Server InstallationLdap DIT Design and Ldif File OpenLDAP Server ConfigurationCustomizing the OpenLDAP Schema Starting the OpenLDAP ServerDIT Creation Using the New SchemaEnable Dial Out Enable Dial BackSecurity Connection Setup Example Windows XPTo delete an IP filter Login FailuresFiltering IP FilteringAccount Policy MAC Filtering Login StringEncryption Private Certificate Working ModeCertificate Signing Request Email Address Administrator@yourcompany.comField Example Time Zone Date/TimeNetwork Time Log Notification SettingsLog Information Main Screen MaintenanceUpgrade Main Firmware Main Firmware Upgrade RecoverySIU Firmware Upgrade Recovery Upgrade AdaptersPing Host Backup/RestoreBackup RestoreDownload Reset on ExitSystem Operation Control Panel Remote Session OperationHotkey Description HotkeysSystem Macros User MacrosRGB Choosing a pre-determined configurationGamma Adjustment Message Display Panel USB Ports on Front Panel of KVM SwitchUser List Panel Compose PanelVirtual Media via Remote Session Virtual MediaMac and Linux Considerations Virtual Media via Local ConsoleWindows XP and later Mouse Synchronization ProceduresManual Mouse Synchronization WindowsRemote Session Operation Remote Session Operation Icon in the Toolbar OSD ToolbarToolbar Hotkeys Hotkey ActionPanel Array Toolbar Auto Scanning Multiuser OperationMenu Bar InstallationLog Server Starting UpDelete ConfigureAdd EditEvents MaintenanceSearch Log Server Main Screen Overview Contents Network RetryOptions HelpThey will not be able to communicate List PanelEvent Panel RecordingAppendix General Operation TroubleshootingAdministration Troubleshooting Problem ActionVirtual Media Troubleshooting Mouse TroubleshootingAP Windows Client Troubleshooting Panel Array Mode Troubleshooting WinClient ActiveX Viewer TroubleshootingJava Applet & AP Java Client Troubleshooting Sun Systems Troubleshooting Log Server TroubleshootingSwitch RJ45 Pins Modem DB9 SpecificationsFactory Default Settings Setting DefaultFan Location & Speed Information Temperature Sensor LocationFan Speed Year Limited Warranty Warranty Registration
Related manuals
Manual 4 pages 42.85 Kb

B064-016-02-IPG, B064-032-02-IPG, B064-016-04-IPG, B064-032-04-IPG specifications

The Tripp Lite B064-032-04-IPG is a highly efficient and versatile KVM switch that offers seamless control over multiple computers or servers from a single console. This device is engineered for professionals and IT administrators who require robust management of servers or machines located in different physical locations, particularly in demanding environments like data centers or server rooms.

One of the standout features of the B064-032-04-IPG is its ability to facilitate access to up to 32 computers using a single set of keyboard, video monitor, and mouse. This not only streamlines workflows but also reduces clutter, as users no longer need multiple sets of peripherals for each machine. The switch supports both USB and PS/2 connection types, making it compatible with a wide range of devices.

The B064-032-04-IPG leverages advanced technology to offer a responsive and high-resolution video output, supporting resolutions up to 1920 x 1200. This ensures that users can easily view and interact with multiple systems without sacrificing visual quality. Additionally, the switch features a built-in web interface that allows administrators to configure settings with ease, enabling effective management in remote or local scenarios.

Security is a top priority with the B064-032-04-IPG, which supports user authentication and multi-level password protection. This guarantees that only authorized personnel can access sensitive systems, bolstering the overall security posture of the network. Furthermore, the switch includes features for firmware updates, ensuring that it stays current with the latest security protocols and enhancements.

Another key characteristic of this KVM switch is its support for hot-swappable functionality, which allows users to add or remove servers without needing to power down the entire system. This greatly enhances operational efficiency and minimizes downtime during maintenance or upgrades.

Built with a sturdy and reliable design, the Tripp Lite B064-032-04-IPG is suitable for various environments, including those that require ruggedness and durability. Its compact form factor makes installation straightforward, and its fanless design ensures silent operation, which is ideal for noise-sensitive areas.

In conclusion, the Tripp Lite B064-032-04-IPG is a powerful KVM switch that combines multiple advanced features, technologies, and characteristics, making it an excellent choice for large-scale server management. With its ease of use, security features, and high performance, it provides a seamless solution for IT professionals looking to optimize their hardware management in complex environments.
Top Page Image Contents