Tripp Lite B064-032-04-IPG History, Port Level, Attribute Description, Section Description

Page 20

OSD Operation (continued)

Connections (continued)

The chart below describes the attributes that are listed for each port.

Attribute

Description

 

 

Port Number

The KVM switch port that the computer or KVM is connected to

 

 

Port Name

If a port is assigned a name, it is displayed here

 

 

Device Name

The name of the KVM switch that the port is on

 

 

Status

Current status of the computer or KVM connected to the port; Online or Offline

 

 

Connect

A Connect icon will be located underneath the port list. Highlight a port and click Connect to open up a remote session

with the selected port displayed.

 

 

 

Note: When accessing the KVM via web browser, this page can be sorted by any attribute by clicking on the column header.

Port Level

When a port is selected in the Sidebar tree, the Connections sub- section will display port connection and configuration options.

The chart below describes the sections that are displayed on this page.

Section

Description

 

 

Status

This displays the Port Status; whether it is online or offline, and whether virtual media can be mounted to it. Click on the

Connect button to open a remote session with the selected port displayed.

 

 

 

 

Each port can have additional ports associated with it, so that the user can access multiple ports via one connection

Associated Link

page. Associated Links can be added/removed from the Port Configuration sub-section (see Port Configuration section

under OSD Operation for details). When ports are available in the Associated Link section, simply highlight one and

 

 

click the Connect button to open a remote session with that port displayed.

 

 

History

The History page provides a record of each time that a port was accessed.

•If there are more entries than there is room on the screen, a scroll bar appears to let you scroll up and down to see the entire record.

•To clear the records and start over, click the Clear History button at the bottom right corner of the page.

Note: You can access a port in the History page by double clicking it, or highlighting it and pressing [Enter]. When accessing the KVM switch via web browser, you can sort the results by clicking on any of the column headers.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents NetDirector Cat5 IP KVM Switches ModelsTable of Contents Remote Console Computer Requirements FeaturesIntroduction Supported Video Resolutions Connected Computer/Server RequirementsServer Interface Units SIUs Supported Operating SystemsSupported Browsers ComponentsFront View No.. Component DescriptionRear View Hardware Setup General Safety InstructionsSingle-Stage Installation Rack Mounting Safety InstructionsStacking Rack MountingTwo-Stage Installation Powering Off & Restarting Single-Stage InstallationsTwo-Stage Installations Hot PluggingSuper Administrator Setup First Time SetupNetwork Setup IP Address Determination Local ConsoleIP Installer NIC SettingsBrowser Redundant NICLocal Console Login Logging Into the B064-Series KVM SwitchChanging the Super Administrator Login Browser Login AP Windows Client LoginFile Menu AP Java Client LoginConnection Screen OSD Operation OSD MainWeb Browser Main AP Client MainPort Access OSD Tab BarLocal Console Main Icon DescriptionNon-Windows Browser ConnectionsInternet Explorer Panel Array Mode Port Selection ListPort Naming ScanHistory Port LevelAttribute Description Section DescriptionModifying a Favorite FavoritesAdding a Favorite Setting Description Disable it. The default setting is enabledUser Preferences Scan DurationAccess SessionsPort Configuration AccessClick until you toggle to the desired setting Virtual media mounted to the selected portTime. Choices are Exclusive, Occupy and Share Port PropertyAssociated Link User Management Adding User AccountsField Description Modifying User Accounts Deleting User AccountsGroups Groups Creating GroupsAssigning Users to Groups Groups Modifying GroupsGroups Deleting Groups Assigning Users to a Group via the User’s Notebook Removing Users From a Group via the User’s NotebookAssigning Users to a Group via the Group’s Notebook Removing Users From a Group via the Group’s NotebookDevice Assignment Power Supply Detection Device ManagementDevice Information OSD Operation for detailsOperating Mode NetworkWhen using them to connect to the KVM switch Advanced Network Management Settings Authentication Disable Local AuthenticationRadius Settings Ldap / Ldaps Authentication and Authorization SettingsCreating a Start Menu Shortcut Entry Install the Windows 2003 Support ToolsInstall the Active Directory Schema Snap-in Extend and Update the Active Directory Schema Select New AttributeCommon Name userprofile Ldap Display Name userprofile Minimum MaximumClick Edit to bring up the String Attribute Editor OpenLDAP Server Installation OpenLDAP ServerOpenLDAP Server Configuration Customizing the OpenLDAP SchemaStarting the OpenLDAP Server Ldap DIT Design and Ldif FileUsing the New Schema DIT CreationEnable Dial Back Enable Dial OutConnection Setup Example Windows XP SecurityLogin Failures FilteringIP Filtering To delete an IP filterEncryption Login StringAccount Policy MAC Filtering Working Mode Private CertificateField Example Email Address Administrator@yourcompany.comCertificate Signing Request Network Time Date/TimeTime Zone Log Information Notification SettingsLog Maintenance Upgrade Main FirmwareMain Firmware Upgrade Recovery Main ScreenUpgrade Adapters SIU Firmware Upgrade RecoveryBackup/Restore BackupRestore Ping HostSystem Operation Reset on ExitDownload Remote Session Operation Control PanelHotkeys Hotkey DescriptionUser Macros System MacrosChoosing a pre-determined configuration RGBGamma Adjustment USB Ports on Front Panel of KVM Switch User List PanelCompose Panel Message Display PanelVirtual Media Virtual Media via Remote SessionVirtual Media via Local Console Mac and Linux ConsiderationsMouse Synchronization Procedures Manual Mouse SynchronizationWindows Windows XP and laterRemote Session Operation Remote Session Operation OSD Toolbar Toolbar HotkeysHotkey Action Icon in the ToolbarPanel Array Toolbar Multiuser Operation Auto ScanningInstallation Log ServerStarting Up Menu BarConfigure AddEdit DeleteSearch MaintenanceEvents Contents Network Retry OptionsHelp Log Server Main Screen OverviewList Panel Event PanelRecording They will not be able to communicateGeneral Operation Troubleshooting Administration TroubleshootingProblem Action AppendixAP Windows Client Troubleshooting Mouse TroubleshootingVirtual Media Troubleshooting Java Applet & AP Java Client Troubleshooting WinClient ActiveX Viewer TroubleshootingPanel Array Mode Troubleshooting Log Server Troubleshooting Sun Systems TroubleshootingSpecifications Factory Default SettingsSetting Default Switch RJ45 Pins Modem DB9Fan Speed Temperature Sensor LocationFan Location & Speed Information Warranty Registration Year Limited Warranty
Related manuals
Manual 4 pages 42.85 Kb

B064-016-02-IPG, B064-032-02-IPG, B064-016-04-IPG, B064-032-04-IPG specifications

The Tripp Lite B064-032-04-IPG is a highly efficient and versatile KVM switch that offers seamless control over multiple computers or servers from a single console. This device is engineered for professionals and IT administrators who require robust management of servers or machines located in different physical locations, particularly in demanding environments like data centers or server rooms.

One of the standout features of the B064-032-04-IPG is its ability to facilitate access to up to 32 computers using a single set of keyboard, video monitor, and mouse. This not only streamlines workflows but also reduces clutter, as users no longer need multiple sets of peripherals for each machine. The switch supports both USB and PS/2 connection types, making it compatible with a wide range of devices.

The B064-032-04-IPG leverages advanced technology to offer a responsive and high-resolution video output, supporting resolutions up to 1920 x 1200. This ensures that users can easily view and interact with multiple systems without sacrificing visual quality. Additionally, the switch features a built-in web interface that allows administrators to configure settings with ease, enabling effective management in remote or local scenarios.

Security is a top priority with the B064-032-04-IPG, which supports user authentication and multi-level password protection. This guarantees that only authorized personnel can access sensitive systems, bolstering the overall security posture of the network. Furthermore, the switch includes features for firmware updates, ensuring that it stays current with the latest security protocols and enhancements.

Another key characteristic of this KVM switch is its support for hot-swappable functionality, which allows users to add or remove servers without needing to power down the entire system. This greatly enhances operational efficiency and minimizes downtime during maintenance or upgrades.

Built with a sturdy and reliable design, the Tripp Lite B064-032-04-IPG is suitable for various environments, including those that require ruggedness and durability. Its compact form factor makes installation straightforward, and its fanless design ensures silent operation, which is ideal for noise-sensitive areas.

In conclusion, the Tripp Lite B064-032-04-IPG is a powerful KVM switch that combines multiple advanced features, technologies, and characteristics, making it an excellent choice for large-scale server management. With its ease of use, security features, and high performance, it provides a seamless solution for IT professionals looking to optimize their hardware management in complex environments.
Top Page Image Contents