Polycom 6400-S manual AC Power Supply Interface Requirements, DC Power Supply LED Indicators

Page 16

User Guide V2IU 6400-S Converged Network Appliance

Voltage

•Minimum tolerance = -38VDC

•Nominal rating = -48 to -60VDC

•Maximum tolerance = -75VDS

•Maximum input current = 17.0 Amps

The power supply will power-off if the DC input is less than -34 VDC.

DC Power Supply LED Indicators

Power Supply condition	Power Supply LED

No DC power to all PSUs	Off

No DC power to this PSU only	Amber

DC present/Only Standby Outputs On	Blink Green

Power supply DC outputs ON and OK	Green

Current limit	Amber

Power supply failure	Amber

AC Power Supply Interface Requirements

The AC power supply operates within the following limits:

•AC line voltage = Auto-ranging for either 100-127 VAC or 200-240 VAC

•AC line frequency = 50/60 Hz

•AC input current = 4 Amp at 100-127 VAC, 2 Amp at 200-240 VAC

AC Power Supply LED Indicators

Power Supply condition	Power Supply LED

No AC power to all PSUs	Off

No AC power to this PSU only	Amber

DC present/Only Standby Outputs On	Blink Green

Power supply DC outputs ON and OK	Green

Power supply in Alert Condition	Blink Amber

Power supply failure	Amber

2 - 4

Image 16

Contents User Guide V2IU 6400-S Converged Network Appliance Trademark Information Contents Configuring Network Settings Configuring VoIPConfiguring the Firewall Administrative OptionsContents User Guide V2IU 6400-S Converged Network Appliance Introduction Introducing the V2IU 6400-S Converged Network ApplianceService Provider E-1NxT-1/E-1 Branch Office Features Physical Connections and SpecificationsManagement Features User Guide V2IU 6400-S Converged Network Appliance Physical Installation1 Installing the 6400-SIf AC power supplies are installed If DC power supplies are installed Power Supplies1 DC Power Supply Interface RequirementsAC Power Supply Interface Requirements DC Power Supply LED IndicatorsConfiguring the V2IU 6400-S Connecting to the 6400-SUser Guide V2IU 6400-S Converged Network Appliance Navigating through the configuration pages Logging in and out of the 6400-SGetting help Getting information about the networkRouting Information Getting information about the system System uptime Recent Call Log Configuring Network Settings Configuring subscriber interface settingsConfiguring provider interface settings Setting the Ethernet link rate Link speed and duplex with locally attached devices Configuring the Network Setting DescriptionTo configure network settings Configuring VoIP To configure VoIP ALG Configuring VoIP Field Description Currently registered Configuring VoIP subnet routing Deleting a VoIP subnet route Configuring VoIP survivability Configuring sofswitch survivabilitySoftswitch redundancy configuration Configuring Vrrp To configure Sofswitch Redundancy, enter the followingConfiguring VoIP User Guide V2IU 6400-S Converged Network Appliance Configuring the Firewall Configuring the firewall basic settingsTo configure basic settings Configuring advanced firewall settings Basic settings rulesAdvanced setting rules Enabling or disabling the firewallAdministrative Options Changing the administration passwordSpecifying user commands Managing SIP, Mgcp or H.323 clients Selecting a client Deleting clientsQuerying clients Adding clientsUsing Network Test Tools Rebooting the systemRestarting the network Running a ping test Running a traceroute testUpgrading the firmware Configuring a management interface Configuring the interfaceReconnecting the 6400-S Configuring the trusted management addresses Move the connection from Port 2 to PortSetting the Provider MTU size Enabling Snmp Field Description Disabling Snmp Enabling remote system loggingAddressport Setting the system date and time Disabling remote system loggingCreating a static route Deleting a static route User Guide V2IU 6400-S Converged Network Appliance Troubleshooting Tips Trouble accessing the InternetAppendix No dial toneTelephone doesnt register with the softswitch Checking the configurations on the ALGPinging the softswitch Checking the ALG registration codeImportant Safeguards Regulatory NoticesOther Rights and Limitations Regulatory Notices Warranty and Warranty Exclusions Regulatory Notices Miscellaneous Regulatory Notices User Guide V2IU 6400-S Converged Network Appliance Regulatory Notices User Guide V2IU 6400-S Converged Network Appliance Regulatory Notices Compliance and Compatibility1 Regulatory Notices