Polycom 6400-S manual Setting the Ethernet link rate

Page 27

Configuring Network Settings

To configure provider interface settings:

1.In the navigation bar, select Network

2.In Provider Interface Settings, select Static IP Address (the most common configuration), or DHCP if a DHCP server assigns the 6400-S's internal address.

3.Enter an IP Address.

4.Enter a Subnet Mask.

5.If you are configuring network settings, see the instructions in "Configuring the Network " on page 20

6.If you want to configure a management interface that is different than the default, complete all of the configuration tasks, then see Configuring a management interface on page 7-9.

7.Press Submit.

Setting the Ethernet link rate

Ethernet autonegotiation is often unreliable, especially between different vendors or old and new networking equipment. Failure of autonegotiation is generally not a cause for concern. However, if the negotiated rates change intermittently or the link is reported as no link or down, the link rate may need to be set manually. An interface that "flutters" because of the autonegotiation setting, may cause intermittent voice and data outages.

4 - 3

Image 27

Contents User Guide V2IU 6400-S Converged Network Appliance Trademark Information Contents Administrative Options Configuring Network SettingsConfiguring VoIP Configuring the FirewallContents User Guide V2IU 6400-S Converged Network Appliance Introducing the V2IU 6400-S Converged Network Appliance IntroductionService Provider E-1NxT-1/E-1 Branch Office Physical Connections and Specifications FeaturesManagement Features User Guide V2IU 6400-S Converged Network Appliance Installing the 6400-S Physical Installation1If AC power supplies are installed If DC power supplies are installed DC Power Supply Interface Requirements Power Supplies1DC Power Supply LED Indicators AC Power Supply Interface RequirementsConnecting to the 6400-S Configuring the V2IU 6400-SUser Guide V2IU 6400-S Converged Network Appliance Logging in and out of the 6400-S Navigating through the configuration pagesGetting information about the network Getting helpRouting Information Getting information about the system System uptime Recent Call Log Configuring subscriber interface settings Configuring Network SettingsConfiguring provider interface settings Setting the Ethernet link rate Link speed and duplex with locally attached devices Setting Description Configuring the NetworkTo configure network settings Configuring VoIP To configure VoIP ALG Configuring VoIP Field Description Currently registered Configuring VoIP subnet routing Deleting a VoIP subnet route Configuring sofswitch survivability Configuring VoIP survivabilitySoftswitch redundancy configuration To configure Sofswitch Redundancy, enter the following Configuring VrrpConfiguring VoIP User Guide V2IU 6400-S Converged Network Appliance Configuring the firewall basic settings Configuring the FirewallTo configure basic settings Basic settings rules Configuring advanced firewall settingsEnabling or disabling the firewall Advanced setting rulesChanging the administration password Administrative OptionsSpecifying user commands Managing SIP, Mgcp or H.323 clients Deleting clients Selecting a clientAdding clients Querying clientsRebooting the system Using Network Test ToolsRestarting the network Running a traceroute test Running a ping testUpgrading the firmware Configuring the interface Configuring a management interfaceReconnecting the 6400-S Move the connection from Port 2 to Port Configuring the trusted management addressesSetting the Provider MTU size Enabling Snmp Field Description Enabling remote system logging Disabling SnmpAddressport Disabling remote system logging Setting the system date and timeCreating a static route Deleting a static route User Guide V2IU 6400-S Converged Network Appliance No dial tone Troubleshooting TipsTrouble accessing the Internet AppendixChecking the ALG registration code Telephone doesnt register with the softswitchChecking the configurations on the ALG Pinging the softswitchRegulatory Notices Important SafeguardsOther Rights and Limitations Regulatory Notices Warranty and Warranty Exclusions Regulatory Notices Miscellaneous Regulatory Notices User Guide V2IU 6400-S Converged Network Appliance Regulatory Notices User Guide V2IU 6400-S Converged Network Appliance Regulatory Notices Compliance and Compatibility1 Regulatory Notices