Polycom 6400-S manual Features, Physical Connections and Specifications

Page 10

User Guide V2IU 6400-S Converged Network Appliance

Features

•Resolves firewall traversal problems at the Network Operations Center for VoIP by providing a VoIP application layer gateway (ALG) or voice and video aware firewall that supports SIP, MGCP and H.323

•Resolves firewall traversal problems at customer offices for VoIP by providing NAT-Traversal capability for SIP.

•Supports up to 10,000 concurrent VoIP calls or up to 85 Mbps of H.323 video traffic

•Protects the enterprise LAN using a stateful packet inspection (SPI) firewall for both voice and data traffic

•Performs static IP routing

•Provides integrated test tools to facilitate problem isolation

•Performs TFTP relay for IP phone images

•Uses a simple web based GUI for configuration and management

•Supports logging to external syslog servers and interfaces to network management systems using SNMP

Physical Connections and Specifications

	Port	Description

	Subscriber (ETH0) Ethernet	This port is a 10/100/1000 auto sensing
	Port 1	port. It is connected through an Ethernet
	Port 1	switch to IP phones, IADs or PCs installed
		switch to IP phones, IADs or PCs installed
		on the public network.

	Provider (ETH1) Ethernet	This port is a 10/100/1000 auto sensing
	Port 2	port. It is connected to the private network.
	Port 2

	Out of Band Management	This port can be configured to allow out of
	Port 3	band management sessions. It is typically
	Port 3	connected to a private management
		connected to a private management
		network.

	Console Port (COM 1)	This port is used to establish a local
		console session with the EdgeProtect
		using a VT100 terminal or emulation
		program. The baud rate is 9600. It is used
		for debug or local diagnostic purposes
		only.

1 - 4

Image 10

Contents User Guide V2IU 6400-S Converged Network Appliance Trademark Information Contents Configuring the Firewall Configuring Network SettingsConfiguring VoIP Administrative OptionsContents User Guide V2IU 6400-S Converged Network Appliance Introduction Introducing the V2IU 6400-S Converged Network ApplianceService Provider E-1NxT-1/E-1 Branch Office Features Physical Connections and SpecificationsManagement Features User Guide V2IU 6400-S Converged Network Appliance Physical Installation1 Installing the 6400-SIf AC power supplies are installed If DC power supplies are installed Power Supplies1 DC Power Supply Interface RequirementsAC Power Supply Interface Requirements DC Power Supply LED IndicatorsConfiguring the V2IU 6400-S Connecting to the 6400-SUser Guide V2IU 6400-S Converged Network Appliance Navigating through the configuration pages Logging in and out of the 6400-SGetting help Getting information about the networkRouting Information Getting information about the system System uptime Recent Call Log Configuring Network Settings Configuring subscriber interface settingsConfiguring provider interface settings Setting the Ethernet link rate Link speed and duplex with locally attached devices Configuring the Network Setting DescriptionTo configure network settings Configuring VoIP To configure VoIP ALG Configuring VoIP Field Description Currently registered Configuring VoIP subnet routing Deleting a VoIP subnet route Configuring VoIP survivability Configuring sofswitch survivabilitySoftswitch redundancy configuration Configuring Vrrp To configure Sofswitch Redundancy, enter the followingConfiguring VoIP User Guide V2IU 6400-S Converged Network Appliance Configuring the Firewall Configuring the firewall basic settingsTo configure basic settings Configuring advanced firewall settings Basic settings rulesAdvanced setting rules Enabling or disabling the firewallAdministrative Options Changing the administration passwordSpecifying user commands Managing SIP, Mgcp or H.323 clients Selecting a client Deleting clientsQuerying clients Adding clientsUsing Network Test Tools Rebooting the systemRestarting the network Running a ping test Running a traceroute testUpgrading the firmware Configuring a management interface Configuring the interfaceReconnecting the 6400-S Configuring the trusted management addresses Move the connection from Port 2 to PortSetting the Provider MTU size Enabling Snmp Field Description Disabling Snmp Enabling remote system loggingAddressport Setting the system date and time Disabling remote system loggingCreating a static route Deleting a static route User Guide V2IU 6400-S Converged Network Appliance Appendix Troubleshooting TipsTrouble accessing the Internet No dial tonePinging the softswitch Telephone doesnt register with the softswitchChecking the configurations on the ALG Checking the ALG registration codeImportant Safeguards Regulatory NoticesOther Rights and Limitations Regulatory Notices Warranty and Warranty Exclusions Regulatory Notices Miscellaneous Regulatory Notices User Guide V2IU 6400-S Converged Network Appliance Regulatory Notices User Guide V2IU 6400-S Converged Network Appliance Regulatory Notices Compliance and Compatibility1 Regulatory Notices