Polycom 6400-S manual Routing Information

Page 21

Configuring the V2IU 6400-S

2.In the System menu, select Network Information.

3.Scroll through the Network Information page to view:

—Routing information

—Link status

—Interface information

Routing Information

The system routing table contains the static routes for the hosts and networks that are on the Provider side of the 6400-S. When the provider and subscriber settings have been fully configured, there must be at least four routing lines displaying:

•The private subnet associated with the Provider interface.

•The immediate subnet associated with the Subscriber interface.

•The loopback interface.

•The network's default gateway, this must be the next-hop-router on the Subscriber side of the 6400-S.

The order of the lines may vary depending on the subnet masks.

Additional lines may be displayed depending on the contents of the Route and VoIP Subnet Routing pages. Each of the entries on these pages will cause an additional entry in the routing table.

3 - 5

Image 21

Contents User Guide V2IU 6400-S Converged Network Appliance Trademark Information Contents Configuring VoIP Configuring Network SettingsConfiguring the Firewall Administrative OptionsContents User Guide V2IU 6400-S Converged Network Appliance Introducing the V2IU 6400-S Converged Network Appliance IntroductionService Provider E-1NxT-1/E-1 Branch Office Physical Connections and Specifications FeaturesManagement Features User Guide V2IU 6400-S Converged Network Appliance Installing the 6400-S Physical Installation1If AC power supplies are installed If DC power supplies are installed DC Power Supply Interface Requirements Power Supplies1DC Power Supply LED Indicators AC Power Supply Interface RequirementsConnecting to the 6400-S Configuring the V2IU 6400-SUser Guide V2IU 6400-S Converged Network Appliance Logging in and out of the 6400-S Navigating through the configuration pagesGetting information about the network Getting helpRouting Information Getting information about the system System uptime Recent Call Log Configuring subscriber interface settings Configuring Network SettingsConfiguring provider interface settings Setting the Ethernet link rate Link speed and duplex with locally attached devices Setting Description Configuring the NetworkTo configure network settings Configuring VoIP To configure VoIP ALG Configuring VoIP Field Description Currently registered Configuring VoIP subnet routing Deleting a VoIP subnet route Configuring sofswitch survivability Configuring VoIP survivabilitySoftswitch redundancy configuration To configure Sofswitch Redundancy, enter the following Configuring VrrpConfiguring VoIP User Guide V2IU 6400-S Converged Network Appliance Configuring the firewall basic settings Configuring the FirewallTo configure basic settings Basic settings rules Configuring advanced firewall settingsEnabling or disabling the firewall Advanced setting rulesChanging the administration password Administrative OptionsSpecifying user commands Managing SIP, Mgcp or H.323 clients Deleting clients Selecting a clientAdding clients Querying clientsRebooting the system Using Network Test ToolsRestarting the network Running a traceroute test Running a ping testUpgrading the firmware Configuring the interface Configuring a management interfaceReconnecting the 6400-S Move the connection from Port 2 to Port Configuring the trusted management addressesSetting the Provider MTU size Enabling Snmp Field Description Enabling remote system logging Disabling SnmpAddressport Disabling remote system logging Setting the system date and timeCreating a static route Deleting a static route User Guide V2IU 6400-S Converged Network Appliance Trouble accessing the Internet Troubleshooting TipsAppendix No dial toneChecking the configurations on the ALG Telephone doesnt register with the softswitchPinging the softswitch Checking the ALG registration codeRegulatory Notices Important SafeguardsOther Rights and Limitations Regulatory Notices Warranty and Warranty Exclusions Regulatory Notices Miscellaneous Regulatory Notices User Guide V2IU 6400-S Converged Network Appliance Regulatory Notices User Guide V2IU 6400-S Converged Network Appliance Regulatory Notices Compliance and Compatibility1 Regulatory Notices