Polycom 6400-S manual Currently registered

	Configuring VoIP
Field	Description
Automatic MGCP Audit	The Automatic MGCP Audit flag specifies
	whether MGCP clients should be
	automatically audited by sending a
	message to each client and wait for a
	response.
Audit Cycle Interval	The Audit Cycle Interval specifies how
	often these messages should be sent out
	to the clients. For each cycle, all endpoints
	are audited so the rate of messages being
	sent is dependent on the number of clients
	currently registered.
State Time	The Stale Time value is used to decide
	when a client is supposed to be deemed
	stale, or unavailable.
Prevent state re-registration	The Prevent stale re-registration flag can
	be used to disable the automatic MGCP
	re-registration feature for stale clients.
Automatic Client Deletion	Automatic Client Deletion will delete
	clients that have been unavailable for a
	given period of time.
Deletion Time	Deletion Time specifies the time that a
	stale client will show a warning icon in the
	client list.
H 323 Terminal Type	The H.323 TerminalType is used to
	specify the type of terminal that the
	6400-S should use. This value should be
	set to endpoint.
Maximum bandwidth (kbps)	This value is not used and should be set
	to 0.
Current payload bandwidth	The total bandwidth in use for H.323 video
	calls as requested by the H.323 video
	endpoints.
Estimated total bandwidth	The total bandwidth in use for video calls;
	generally the current payload bandwidth
	plus 20% for packet overhead.
H 323 Max Aliases	This value is not used and should be set
	to 0.

5 - 5