Polycom 6400-S manual To configure basic settings

Page 44

User Guide V2IU 6400-S Converged Network Appliance

To configure basic settings:

1.In the navigation pane, select Firewall.

2.In the section: Basic LAN and WAN Firewall Settings, enable the management services that you want to reach the 6400-S by checking the appropriate box for:

—Allow HTTP access through firewall

—Allow TELNET access through firewall

—Allow SSH access through firewall

—Allow SNMP access through firewall

3.Configure Allow TCP Port according to the rules in "Basic settings rules" on page 31. This setting allows traffic with the specified TCP port to terminate on the 6400-S.

4.Configure Allow UDP Port according to the rules in Basic settings rules on page 6-3. This setting allows traffic with the specified UDP port to terminate on the 6400-S.

5.Skip Enable PPTP server Pass-through. This setting is not currently used.

6.Enter an IP address in PPTP Server IP Address. This setting is not currently used.

7.To restrict Trusted Management to the Management Interface, see Configuring a management interface on page 7-9.

8.Press Submit.

6 - 2

Image 44

Contents User Guide V2IU 6400-S Converged Network Appliance Trademark Information Contents Configuring Network Settings Configuring VoIPConfiguring the Firewall Administrative OptionsContents User Guide V2IU 6400-S Converged Network Appliance Introduction Introducing the V2IU 6400-S Converged Network ApplianceService Provider E-1NxT-1/E-1 Branch Office Features Physical Connections and SpecificationsManagement Features User Guide V2IU 6400-S Converged Network Appliance If AC power supplies are installed Installing the 6400-SPhysical Installation1 If DC power supplies are installed Power Supplies1 DC Power Supply Interface RequirementsAC Power Supply Interface Requirements DC Power Supply LED IndicatorsConfiguring the V2IU 6400-S Connecting to the 6400-SUser Guide V2IU 6400-S Converged Network Appliance Navigating through the configuration pages Logging in and out of the 6400-SGetting help Getting information about the networkRouting Information Getting information about the system System uptime Recent Call Log Configuring Network Settings Configuring subscriber interface settingsConfiguring provider interface settings Setting the Ethernet link rate Link speed and duplex with locally attached devices Configuring the Network Setting DescriptionTo configure network settings Configuring VoIP To configure VoIP ALG Configuring VoIP Field Description Currently registered Configuring VoIP subnet routing Deleting a VoIP subnet route Configuring VoIP survivability Configuring sofswitch survivabilitySoftswitch redundancy configuration Configuring Vrrp To configure Sofswitch Redundancy, enter the followingConfiguring VoIP User Guide V2IU 6400-S Converged Network Appliance Configuring the Firewall Configuring the firewall basic settingsTo configure basic settings Configuring advanced firewall settings Basic settings rulesAdvanced setting rules Enabling or disabling the firewallAdministrative Options Changing the administration passwordSpecifying user commands Managing SIP, Mgcp or H.323 clients Selecting a client Deleting clientsQuerying clients Adding clientsRestarting the network Rebooting the systemUsing Network Test Tools Running a ping test Running a traceroute testUpgrading the firmware Configuring a management interface Configuring the interfaceReconnecting the 6400-S Configuring the trusted management addresses Move the connection from Port 2 to PortSetting the Provider MTU size Enabling Snmp Field Description Disabling Snmp Enabling remote system loggingAddressport Setting the system date and time Disabling remote system loggingCreating a static route Deleting a static route User Guide V2IU 6400-S Converged Network Appliance Troubleshooting Tips Trouble accessing the InternetAppendix No dial toneTelephone doesnt register with the softswitch Checking the configurations on the ALGPinging the softswitch Checking the ALG registration codeImportant Safeguards Regulatory NoticesOther Rights and Limitations Regulatory Notices Warranty and Warranty Exclusions Regulatory Notices Miscellaneous Regulatory Notices User Guide V2IU 6400-S Converged Network Appliance Regulatory Notices User Guide V2IU 6400-S Converged Network Appliance Regulatory Notices Compliance and Compatibility1 Regulatory Notices