Polycom 6400-S manual Setting the system date and time, Disabling remote system logging

Page 63

Administrative Options

Disabling remote system logging

To disable remote system logging, select Services Configuration from the

System menu and uncheck Enable Remote System Logging.

Setting the system date and time

The System Time page allows the user to set the 6400-S's time or configure it to synchronize with a network time source via Simple Network Time Protocol (SNTP).

To set the system date and time:

1.In the navigation bar, select System.

2.In the System menu, select System Time.

3.Enable SNTP by checking the box.

4.To synchronize with a SNTP server on the network, enable SNTP and set the address of the SNTP server. The server address can be either an IP address or the DNS name of the SNTP server.

5.To set the date and time, enter information as follows. The date on the device can be set manual using this option. The values are entered in numeric form.

7 - 17

Image 63

Contents User Guide V2IU 6400-S Converged Network Appliance Trademark Information Contents Administrative Options Configuring Network SettingsConfiguring VoIP Configuring the FirewallContents User Guide V2IU 6400-S Converged Network Appliance Introducing the V2IU 6400-S Converged Network Appliance IntroductionService Provider E-1NxT-1/E-1 Branch Office Physical Connections and Specifications FeaturesManagement Features User Guide V2IU 6400-S Converged Network Appliance Installing the 6400-S Physical Installation1If AC power supplies are installed If DC power supplies are installed DC Power Supply Interface Requirements Power Supplies1DC Power Supply LED Indicators AC Power Supply Interface RequirementsConnecting to the 6400-S Configuring the V2IU 6400-SUser Guide V2IU 6400-S Converged Network Appliance Logging in and out of the 6400-S Navigating through the configuration pagesGetting information about the network Getting helpRouting Information Getting information about the system System uptime Recent Call Log Configuring subscriber interface settings Configuring Network SettingsConfiguring provider interface settings Setting the Ethernet link rate Link speed and duplex with locally attached devices Setting Description Configuring the NetworkTo configure network settings Configuring VoIP To configure VoIP ALG Configuring VoIP Field Description Currently registered Configuring VoIP subnet routing Deleting a VoIP subnet route Configuring sofswitch survivability Configuring VoIP survivabilitySoftswitch redundancy configuration To configure Sofswitch Redundancy, enter the following Configuring VrrpConfiguring VoIP User Guide V2IU 6400-S Converged Network Appliance Configuring the firewall basic settings Configuring the FirewallTo configure basic settings Basic settings rules Configuring advanced firewall settingsEnabling or disabling the firewall Advanced setting rulesChanging the administration password Administrative OptionsSpecifying user commands Managing SIP, Mgcp or H.323 clients Deleting clients Selecting a clientAdding clients Querying clientsRebooting the system Using Network Test ToolsRestarting the network Running a traceroute test Running a ping testUpgrading the firmware Configuring the interface Configuring a management interfaceReconnecting the 6400-S Move the connection from Port 2 to Port Configuring the trusted management addressesSetting the Provider MTU size Enabling Snmp Field Description Enabling remote system logging Disabling SnmpAddressport Disabling remote system logging Setting the system date and timeCreating a static route Deleting a static route User Guide V2IU 6400-S Converged Network Appliance No dial tone Troubleshooting TipsTrouble accessing the Internet AppendixChecking the ALG registration code Telephone doesnt register with the softswitchChecking the configurations on the ALG Pinging the softswitchRegulatory Notices Important SafeguardsOther Rights and Limitations Regulatory Notices Warranty and Warranty Exclusions Regulatory Notices Miscellaneous Regulatory Notices User Guide V2IU 6400-S Converged Network Appliance Regulatory Notices User Guide V2IU 6400-S Converged Network Appliance Regulatory Notices Compliance and Compatibility1 Regulatory Notices