TP-Link TD-W8960N manual ATM-PPPoA, ATM-IPoA, ETH-PPPoE

TD-W8960N Wireless N ADSL2+ Modem Router User Guide

1.Add a new ATM interface and select EoA option for DSL Link Type (see 4.4.1.1 ATM interfaces).

2.Click the Add button on the screen Figure 4-8.Select WAN Service Interface over ATM PVC on the next screen (as shown Figure 4-9).

3.Select Bridge option for the WAN Service type on the screen (as shown Figure 4-10),and click Next button to continue.

4.On the next screen (as shown Figure 4-14)you will see the detailed settings you’ve made. Please click the Apply/Save button to save these settings.

4.4.2.4ATM-PPPoA

If your ISP provides a PPPoA connection and you need to use an ATM Interface, follow the steps below to add a WAN service over a selected ATM interface:

1.Add a new ATM interface and select PPPoA option for DSL Link Type (see 4.4.1.1 ATM interfaces).

2.Click the Add button on the screen Figure 4-8and the next configuration is similar to PPPoE, (see section 4.4.2.1 ATM-EoA-PPPoE). The difference is that you don’t need to set the PPPoE Service Name and Bridge PPPoE Frames Between WAN and Local Ports on the screen of Figure 4-11.

4.4.2.5 ATM-IPoA

If your ISP provides an IPoA connection and you need to use an ATM Interface, follow the steps below to add a WAN service over a selected ATM interface

1.Add a new ATM interface and select IPoA option for DSL Link Type (see 4.4.1.1 ATM interfaces).

2.Click the Add button on the screen Figure 4-8and the next configuration is similar to IPoE (see section 4.4.2.2 ATM-EoA-IPoE). The difference is that you have to manually set the Static IP Address on the screen of Figure 4-16,and the Static IP Address for DNS Server on the screen of Figure 4-19.

4.4.2.6 ETH-PPPoE

If your ISP provides a PPPoE connection and you need to use an ETH Interface, follow the steps below to add a WAN service over a selected ETH interface:

1.Add a new ETH interface on the screen of 4.4.1.2 ETH interfaces.

2.Click the Add button on the screen Figure 4-8and the next configuration is similar to PPPoE over ATM interface (see section 4.4.2.1 ATM-EoA-PPPoE). The difference is that you have to set the 802.1P Priority and 802.1Q VLAN ID on the screen as shown below (corresponding screen see Figure 4-10).

27