TP-Link TD-W8960N manual Quality of Service

TD-W8960N Wireless N ADSL2+ Modem Router User Guide

4.4.8 Quality of Service

Choose “Advanced Setup”Æ“Quality of Service”, you can enable QoS (Quality of Service) on the screen (shown in Figure 4-42). QoS helps to prioritize data as it enters your router. By attaching special identification marks or headers to incoming packets, QoS determines which queue the packets enter, based priority. This is useful when there are certain types of data you want to give higher priority, such as voice data packets give higher priority than Web data packets. This option will provide better service of selected network traffic over various technologies.

Figure 4-42

Select the Enable QoS checkbox to enable all QoS for all interfaces.

Select a default DSCP make from drop-down list to automatically mark incoming traffic without reference to a particular classifier.

Click Save/Apply to save the current configuration.

)Note:

The default DSCP mark is used to mark all egress packets that do not match any classification rules.

4.4.8.1 Queue Config

Choose “Advanced Setup”Æ“Quality of Service”Æ“Queue Config”, you can set up virtual servers on the screen below.

Figure 4-43

44