TP-Link TD-W8960N manual By PBC

TD-W8960N Wireless N ADSL2+ Modem Router User Guide

)Note:

This feature is available only when OPEN, WPA-PSK, WPA2-PSK or Mixed WPA2/WPA-PSK mode is configured.

)Note:

1)To build a successful connection by WSC, you should also do the corresponding configuration of the new device for WSC function meanwhile.

2)WSC (Wireless Security Corporation) is one kind of WPS (Wi-Fi Protected Setup) method.

I. By PBC

If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC) method, you can add it to the network by PBC with the following two methods. Click Push-Button, you will see the screen as shown below.

Figure 4-69

Method One: Hardware push button.

Step 1: Press the QSS button on the front panel of the Router.

Step 2: Press and hold the QSS button of the adapter directly for 2 or 3 seconds.

Step 3: Wait for a while until the next screen of adapter appears. Click Finish to complete the QSS configuration.

61