TD-W8960N Wireless N ADSL2+ Modem Router User Guide
Click the Add button, and you can configure the QoS queue entry on the next screen (shown in Figure
Figure
¾Name: Set a name for the entry.
¾Enable: Select Enable option to take this entry effect.
¾Interface: Assigned a specific Wan Service for this QoS queue entry.
¾Precedence: Specify precedence for this QoS queue entry.
¾DSL Latency: Select latency path for the type of data transmission, only Path0 is available for this Router.
After you specify the condition, click Save/Apply to save the entry.
)Note:
1)Lower integer values for precedence imply higher priority for this queue relative to others.
2)The queue entry configured here will be used by the classifier to place ingress packets appropriately.
4.4.8.2 QoS Classification
This section will guide you to create a traffic class rule to classify the upstream traffic, assign queue which defines the precedence and the interface and optionally overwrite the IP header DSCP byte.
A rule consists of a class name and at least one condition below. All of the specified conditions in this classification rule must be satisfied for the rule to take effect.
45