TD-W8960N Wireless N ADSL2+ Modem Router User Guide
Figure
2.Select the application from the
3.Enter the Trigger Port Start, Trigger Port End, Open Port Start and Open Port End in the table, and then select the Trigger protocol and Open protocol, TCP, UDP or All.
4.Click Save/Apply to enable the settings.
)Note:
If you select the application from the
4.4.5.3 DMZ Host
Choose “Advanced Setup”Æ“NAT”Æ“DMZ Host”, you can set up DMZ Host on the screen (shown in Figure
The DMZ host feature can make a local host be exposed to the Internet for a
35