TP-Link TD-W8960N manual 5 NAT

TD-W8960N Wireless N ADSL2+ Modem Router User Guide

Figure 4-22

Type the new value for the WAN Interface who’s MAC Address you want to change, and click Save/Apply.

You can select corresponding WAN Interface from the drop-down list and click Clone button to clone your current PC MAC, and then click Save/Apply.

Click Restore Default button to restore the WAN Interface’s default MAC Address.

)Note:

Only the WAN Ports can using MAC Address Clone function. All the clone MAC Address must not be the same with each other.

4.4.5 NAT

NAT (Network Address Translation) allows you to share one WAN (Wide Area Network) IP address for multiple computers on your LAN (Local Area Network).

Choose “Advanced Setup”Æ“NAT”, there are four submenus under the main menu: Virtual Servers, Port Triggering and DMZ Host. Click any of them, and you will be able to configure the corresponding function.

Figure 4-23

)Note:

When you select PPPoA or PPPoE for the WAN Setup, or when you select Enable NAT for the type of IPoA and IPoE connection (4.4.2 WAN Service), you will see the NAT menu in the Web-based Utility (shown in Figure 4-23).

31