TP-Link TD-W8960N manual II. By PIN

TD-W8960N Wireless N ADSL2+ Modem Router User Guide

Step 3: Wait for a while until the next screen appears. Click Finish to complete the QSS configuration.

Figure 4-72

II. By PIN

If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with the following two methods.

Method One: Enter the PIN of wireless adapter into my Router.

Step 1: Select the PIN checkbox and enter the PIN code of the wireless adapter in the field under as shown below. Then click Add Enrollee.

Figure 4-73

)Note:

The PIN code of the adapter is always displayed on the QSS configuration screen.

63