TD-W8960N Wireless N ADSL2+ Modem Router User Guide
4.4.9.3 RIP
Choose “Advanced Setup”Æ“Routing”Æ“RIP”, you can see the RIP (Routing Information Protocol) screen which allows you to configure the RIP (shown in Figure
Figure
)Note:
RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE).
To activate RIP for the device, configure an individual interface, select the desired RIP version and operation, and select Enabled checkbox for the interface.
Click Save/Apply to save the configuration.
4.4.10 DNS
When you select the connection type PPPoE, PPPoA or IPoA for WAN configuration, you will see the DNS menu in the
Figure
4.4.10.1 DNS Server
Choose “Advanced Setup”Æ“DNS”Æ“DNS Server”. You can see the DNS Server Configuration screen, this screen allows you to configure the DNS Server Addresses (shown in Figure
49