LOW Frequency Limit -3 DB Point, Crossover Type

Peavey PR®15D

SPECIFICATIONS

ENCLOSURE: Peavey PR 15D (domestic)

FREQUENCY RESPONSE: 47 Hz to 20 kHz

LOW FREQUENCY LIMIT (-3 DB POINT):

36 Hz

USEABLE LOW FREQUENCY LIMIT (-10 DB

POINT):

42 Hz

INTERNAL POWER AMPLIFIERS (@120 VAC LINE):

Woofer - 150 Watts @ less than 0.1% distortion

Tweeter - 70 Watts peak dynamic power 50 Watts @ less than 0.1% distortion.

NOMINAL SENSITIVITY (1W @1M, SWEPT SINE INPUT IN ANECHOIC ENVIRONMENT):

97 dB

MAXIMUM SOUND PRESSURE LEVEL: 120 dB music peak

NOMINAL RADIATION ANGLES: 90˚ horizontal by 40˚ vertical

TRANSDUCER COMPLEMENT:

15" heavy duty woofer and RX™14 1.4" titanium diaphragm compression driver tweeter

BOX TUNING FREQUENCY (FBOX):

55 Hz

ELECTROACOUSTIC CROSSOVER

FREQUENCY: 2,000 Hz

CROSSOVER TYPE:

Internal Electronic two-way crossover with CD horn EQ, level matching, bass boost and subsonic filtering.

CROSSOVER SLOPES:

18 dB/octave (third order) low pass,

18 dB/octave (third order) high pass, both with staggered poles and driver EQ. Unit has horn spatially aligned with woofer.

ELECTRONIC INPUT IMPEDANCE (NOMINAL): 10 k ohms unbalanced, 20 k ohms balanced line level, 2.4 k ohms balanced mic level.

INPUT CONNECTIONS:

One combo female XLR/ 1/4" phone jack providing balanced operation, with switch selectable mic or line level sensitivity. Also has two 1/4" phone jack line level unbalanced input and output.

ENCLOSURE MATERIALS AND FINISH: Injection-molded polypropylene of a nominal thickness of 1/4" with internal ribbing and bracing, and with textured finish. Molded material is black.

MOUNTING:

Subwoofer pole-mounting via molded- in mount, flying via Versamount™ 70 and four rubber feet for floor use.

DIMENSIONS:

28.56" (72.5 cm) tall by 21.31"

(54.1 cm) wide {11.50"/29.2 cm in rear} by 17.00" (43.2 cm) deep

OPTIONAL ACCESSORIES: Impulse® 200 Floor Monitor Kit (FG# 00370480)

NET WEIGHT: 37 lbs.

ADDITIONAL REMARKS:

Also available as a passively crossed- over unit, the Peavey PR 15.

ELECTRONICS AND AMPLIFIER SPECIFICATIONS:

ELECTRONIC INPUT IMPEDANCE (NOMINAL): Primary balanced input: 20 k ohms line level sensitivity selected, 2.4 k ohms mic level sensitivity selected, 10 k ohms unbalanced 1/4".

MIC SWITCH SENSITIVITY INCREASE: 30 dB

INFRASONIC FILTER PROTECTION: 36 dB/octave roll-off

Woofer servo that subtracts error so that the woofer cone follows the drive waveform precisely.

Constant Loudness (Fletcher-Muson) circuit for accenuating bass and treble at low listening volume levels.

NOMINAL AMPLIFIER FREQUENCY RESPONSE: +0, -1 dB from 10 Hz to 30 kHz

HUM AND NOISE:

Greater than 90 dB below rated power

DDT DYNAMIC RANGE:

Greater than 14 dB

THD AND IM:

Typically less than 0.1 %

DAMPING FACTOR:

Greater than 100 @ 1000 Hz, 8 ohms

POWER REQUIREMENTS OF PEAVEY PR™15D SYSTEM (DOMESTIC): Nominal 110 watts, 120 VAC, 60 Hz

PR 15 D specifications

The Peavey PR 15 D is a powerful and versatile active loudspeaker designed for professional audio applications. It is particularly suited for live performances, mobile DJ setups, and installations due to its robust design and advanced technology. One of the standout features of the PR 15 D is its high-output performance, which delivers exceptional sound reproduction in a variety of settings.

At the heart of the PR 15 D is a 15-inch low-frequency driver that provides deep, punchy bass tones, while the 1.4-inch titanium diaphragm compression driver ensures clear and detailed high frequencies. This combination results in a well-balanced sound profile that can fill large venues with ease. The loudspeaker is rated for a maximum output of 1,000 watts peak power, making it capable of handling both music and vocal applications without distortion.

The PR 15 D also incorporates Peavey's exclusive Smart Filter technology, which optimizes the frequency response and enhances overall sound quality. This technology ensures that the speaker performs optimally across all frequencies, delivering a clear and accurate sound signature. Additionally, the built-in digital signal processing (DSP) includes sophisticated algorithms that manage crossover, EQ, and limiter functions, further enhancing performance and protecting the speaker from damage during high-output situations.

Durability is a key characteristic of the PR 15 D. The speaker is housed in a lightweight, yet rugged polypropylene enclosure, making it easy to transport while able to withstand the rigors of road use. The angular design allows for versatile placement options, whether on the ground, a speaker stand, or as a monitor. Integrated handles facilitate easy carrying and positioning, adding to its practicality for mobile use.

Connectivity options are plentiful, featuring both XLR and TRS inputs, which allow users to connect microphones, instruments, or mixers with ease. The XLR output allows for linking multiple speakers, ensuring an expansive audio setup.

Overall, the Peavey PR 15 D stands out for its powerful performance, advanced technologies, and durable design, making it an excellent choice for anyone seeking a reliable and high-quality loudspeaker for various sound reinforcement applications. Whether for live music, presentations, or DJ events, the PR 15 D delivers exceptional sound quality and versatility, ensuring that every performance is memorable.