Delta Electronics manual CANopen Communication Module DVPCOPM-SL

CANopen Communication Module DVPCOPM-SL

PDO” and click on “PDO Mapping”, and you will enter the “PDO Mapping…” page as below. You can add the parameters in “Available Objects from EDS file” into “Mapped Objects”. The total length of the parameters added in each PDO cannot exceed 8 bytes. After the configuration is completed, click on “OK”.

In the “Node Configuration…” page, click on “Properties” to enter the "PDO Properties” page and modify COB-ID and Transmit type. After the configuration is completed, click on “OK”. In the “Node Configuration…” page, click on “Define PDO” to self define RxPDO ir TxPDO.

In this example, we adopt the default configuration. Finally, click “OK” in the “Node Configuration…” page.

zNode List Setting

16 DVP-PLC Application Manual