Compaq LP8000-F1 manual Alpa Selid

								Troubleshooting 4-13
Table 4-5
Current Private Loop Device Mapping continued
Bus #		Target#		Lun#	*AL_PA	*SEL_ID	**AL_PA		**SEL_ID
0	0-31		0-7		None	None	None		None
3***	0		0-7		0x73	0x3F	0x74		0x3E
	1		0-7		0x74	0x3E	0x73		0x3F
	2		0-7		0x75	0x3D	0x72		0x40
	3		0-7		0x76	0x3C	0x71		0x41
	4		0-7		0x79	0x3B	0x6E		0x42
	5		0-7		0x7A	0x3A	0x6D		0x43
	6		0-7		0x7C	0x39	0x6C		0x44
	7		0-7		0x80	0x38	0x6B		0x45
	8		0-7		0x81	0x37	0x6A		0x46
	9		0-7		0x82	0x36	0x69		0x47
	10		0-7		0x84	0x35	0x67		0x48
	11		0-7		0x88	0x34	0x66		0x49
	12		0-7		0x8F	0x33	0x65		0x4A
	13		0-7		0x90	0x32	0x63		0x4B
	14		0-7		0x97	0x31	0x5C		0x4C
	15		0-7		0x98	0x30	0x5A		0x4D
	16		0-7		0x9B	0x2F	0x59		0x4E
	17		0-7		0x9D	0x2E	0x56		0x4F
	18		0-7		0x9E	0x2D	0x55		0x50
	19		0-7		0x9F	0x2C	0x54		0x51

*Use this translation if registry ScanDown = 0 (default)

**Use this translation if registry ScanDown = 1

***If MapBus0=1;, then device addressing starts with Bus #0, not #1

continued