Installation
Recording Reference Numbers
Each HBA ships with a unique address identifier that is stored in flash memory. Fibre channel industry standards issue two unique identifiers: WorldWide Port Name (WWPN) and Node Name (NN), each of which is derived from the HBA’s IEEE address. Combined, the WWPN and NN create the WorldWide Name (WWN) which is an
Recording the Address and Serial Number
The WWN address and serial number are clearly marked on the HBA. Record the addresses on the lines below for future reference.
IEEE address: __________________________________________________
Serial number: __________________________________________________
Installing the HBA into a Computer
Following is the procedure for installing the HBA into a computer.
WARNING: Be sure to observe the ESD precautions for this procedure.
1.Make sure the computer is powered down and the AC power cord is disconnected.
2.Remove the screws on the computer cover, and then remove the cover.
3.Remove the blank panel from an empty 32- or
4.Insert the HBA into the empty PCI bus slot; press firmly until it is seated securely.
5.Secure the HBA mounting bracket to the computer panel with the panel screws.
6.Replace the computer cover and secure it using the previously removed screws.