Compaq LP8000-F1 manual Symbols in Text, Symbols on Equipment

Page 8

viii Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide

Symbols in Text

These symbols may be found in the text of this guide. They have the following meanings.

WARNING: Text set off in this manner indicates that failure to follow directions in the warning could result in bodily harm or loss of life.

CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.

IMPORTANT: Text set off in this manner presents clarifying information or specific instructions.

NOTE: Text set off in this manner presents commentary, sidelights, or interesting points of information.

Symbols on Equipment

These icons may be located on equipment in areas where hazardous conditions may exist.

Any surface or area of the equipment marked with these symbols indicates the presence of electrical shock hazards. Enclosed area contains no operator serviceable parts.

WARNING: To reduce the risk of injury from electrical shock hazards, do not open this enclosure.

Any RJ-45 receptacle marked with these symbols indicates a Network Interface Connection.

WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telephone or telecommunications connectors into this receptacle.

Image 8
Contents Bit PCI-To-Fibre Channel Host Bus Adapter Page Contents Device Driver Installation Glossary Index List of Figures About This Guide Text ConventionsSymbols in Text Symbols on EquipmentGetting Help Compaq Technical SupportCompaq Website Compaq Authorized Reseller Product Description IntroductionOverview Bit PCI-to-fibre channel host bus adapter Jumper Settings HBA Jumper SettingsJumper Pins Description Device ID Comments Bit PCI-to-Fibre Channel Host Bus AdapterPerformance Specifications StandardsAgency Approvals Page Hardware Requirements InstallationInstallation Overview OEMSETUP.INF TXTSETUP.OEM Lpscsi LPUTILNT.EXE Software and Documentation RequirementsRecording the Address and Serial Number Installing the HBA into a ComputerRecording Reference Numbers Verifying the Installation Configuration Guidelines for Operating SystemsPost LED Indicators Green LED Yellow LED StateInstallation Page Windows NT 4.0 System Requirements Device Driver InstallationIntroduction Installing the Windows NT Scsi Device Driver Verifying the Device Driver Installation Removing the Device DriverShow Adapter / -SET Adapter Commands Tru64Unix Driver and Console SoftwareShow Adapter Command WWIDMGR-SHOW AdapterSET Adapter example OpenVMS Driver and Console Software Page Troubleshooting Post Conditions and ResultsGreen LED Yellow LED Description Windows NT Event ViewerHBA Post LED States Explanation Windows NT Scsi Port Error LogWindows NT Miniport Event Log Codes Windows NT Scsi Port Error Log 0x10 Explanation 0x11to 0x13 Further Information Offset0x11 to 0x13 Further Information Windows NT Scsi Port Error Log 0x10 Explanation Offset 0xF30xF4 HBA reset Parameter Error Values valid only when CmdStat=0x3 CmdStat ValuesFurther Information 0x12 Offset ExplanationParameter Error Values valid only when CmdStat=0x3 0x12 OffsetWindows NT Scsi Address Mapping Fabric Device MappingPrivate Loop Device Mapping Current Private Loop Device MappingBus # Target# Lun# NoneCurrent Private Loop Device Mapping Current Private Loop Device Mapping Bus # Target# Lun# Current Private Loop Device Mapping Alpa Selid Current Private Loop Device Mapping Alpa Selid Current Private Loop Device Mapping Alpa Selid Page Firmware and Diagnostic Utility Diagnostic and Firmware Download UtilityI386 System Installation Starting I386DNLD.EXE in an i386 SystemOption Description Starting Alpha Systems with Alpha BiosI386DNLD.EXE Command Options Start-Up for Alpha/i386 Systems Return Menu Selection Diagnostics Main MenuI386DNLD.EXE Main Menu Options Maintenance Test Host Bus AdaptersModify Test Options Restart Host Bus AdaptersQuit Diagnostic and Firmware Loader UtilityShow Host Bus Adapter Info Firmware and Diagnostic Utility Page Using Lputilnt Utility/NT Viewing HBA Parameters Main menu screenPerforming HBA Firmware Maintenance Using the Lputilnt Utility/NTFirmware maintenance screen Upgrading HBA Firmware Deleting or Activating Firmware ImageDownloading PCI Configuration Files Enabling or Disabling Boot BiosModifying Driver Parameters Windows NT Registry Modifying the Driver ParametersDrive Parameters ParameterParameter Description QueueDepth = n QueueTarget = nDrive Parameters AlPA Addresses Page Boot Bios System RequirementsDisk In-line Exerciser RA8000 or ESA12000 Boot SetupAuto-Configure Option Boot Bios Defining a Fibre Channel Drive as Boot Drive Enabling Boot BiosCreating an MS-DOS Boot Diskette Designating a Fibre Channel Boot Drive on Your ComputerPageUp key Enabling HBA Boot Bios on a Fibre Channel Hard Drive Enabling the Boot BiosFormatting the Fibre Channel Drive on Your Computer PurposePage Installing Windows NT Page Regulatory Compliance Notices FCC Compliance Information Statement Model LP8000-F1 1 XPage Reference Manual Statements for Class B Equipment Federal Communications Commission NoticePage Glossary Page Glossary Page Glossary Page Index Show ADAPTER/-SET AdapterPage Index Page