Compaq LP8000-F1 manual Alpa Selid

								Troubleshooting 4-15
Table 4-5
Current Private Loop Device Mapping continued
Bus #		Target#		Lun#	*AL_PA	*SEL_ID	**AL_PA		**SEL_ID
0	0-31		0-7		None	None	None		None
	6		0-7		0xBA	0x1A	0x35		0x63
	7		0-7		0xBC	0x19	0x34		0x64
	8		0-7		0xC3	0x18	0x33		0x65
	9		0-7		0xC5	0x17	0x32		0x66
	10		0-7		0xC6	0x16	0x31		0x67
	11		0-7		0xC7	0x15	0x2E		0x68
	12		0-7		0xC9	0x14	0x2D		0x69
	13		0-7		0xCA	0x13	0x2C		0x6A
	14		0-7		0xCB	0x12	0x2B		0x6B
	15		0-7		0xCC	0x11	0x2A		0x6C
	16		0-7		0xCD	0x10	0x29		0x6D
	17		0-7		0xCE	0x0F	0x27		0x6E
	18		0-7		0xD1	0x0E	0x26		0x6F
	19		0-7		0xD2	0x0D	0x25		0x70
	20		0-7		0xD3	0x0C	0x23		0x71
	21		0-7		0xD4	0x0B	0x1F		0x72
	22		0-7		0xD5	0x0A	0x1E		0x73
	23		0-7		0xD6	0x09	0x1D		0x74
	24		0-7		0xD9	0x08	0x1B		0x75
	25		0-7		0xDA	0x07	0x18		0x76

*Use this translation if registry ScanDown = 0 (default)

**Use this translation if registry ScanDown = 1

***If MapBus0=1;, then device addressing starts with Bus #0, not #1

continued