Compaq LP8000-F1 manual Windows NT Scsi Port Error Log

4-4Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide

Table 4-2

Windows NT SCSI Port Error Log continued

0x10	Explanation		0x11to 0x13 Further Information
Offset
0xDA	Hard link down time-out		0x11	= local req. state, 12 =
	occurred		discstate, 13 = mailbox word 0
0xE0	Node purged from configuration		0x11 to 0x13 = D_ID of node purged
0xE1	Error interrupt occurred		Status register bytes 1-3 in event 11-
			13. E1 error indicates an HBA
			hardware failure, return HBA for repair.
0xE2	Mailbox cmd time-out		0x11	= command
0xE3	Mailbox rsp err		0x11	= command, 12-13 = mbxstatus
0xE4	HBA not ready after init		Status register bytes 1-3 in event 11-
		13
0xE5	Requested loop but link = PT-
	PT
0xE6	Mailbox int. but cmd not		0x11	= MB cmd, 12-13 = mbxstatus
	complete
0xE7	SRB already queued to ring
0xE8	RESTART failed
0xE9	PORT BYPASS (LPB) received
0xEB	Unknown IOCB cmd rsp		0x11	= 15:8 = cmd field
0xEC	Uncached extension alloc. Error
0xED	Link down @ boot time (30 sec)
0xEF	Too many interrupts at initial
	boot
0xF0	Rcv ELS request (possible		0x11	= ELS type, 12-13 = X_ID
	logout)
0xF1	LinkUp error; LP8 down, driver		0x11	= parameter field, 12 = IOCB
	up		cmd
0xF2	LinkUp w/ illegal or corrupt RPI		0x11	= parameter field, 12 = IOCB
			cmd

continued