mar345 Program Manual | 6 |
______________________________________________________________________________________
2.2 Input Files
The program mar345 requires the following input files to work properly:
a)$MARLOGDIR/mar345.dat
The program continuously saves edited parameters into this file. It is nice to find the program in the same state where you left it at startup. However, if mar345.dat cannot be found, program defaults will be used.
b)$MARTABLEDIR/config.XXX
XXXis a 3−digit serial number. This file contains essential scanner specific information. Fo r the scanner to produce valid data it is essential to have this file with all entries corresponding to valid parameters for the scanner. The program mar345 will use program defaults if this file is not available.
c)$MARTABLEDIR/mar2300.XXX
XXXis a 3−digit serial number. This file contains flat−field corrections and the geometry tab le for transforming spiral images into Cartesian images for all scans at 0.15 mm pixelsize. This file is scanner−specific and required to do scans in 0.15 mm pixel modes. The typical size o f this file is 73 MB.
d)$MARTABLEDIR/ma3450.XXX
Same as mar23000.XXX but used for all scans at 0.10 mm pixelsize. The typical size of this file is 103 MB.
See Appendix A and B for more information about input files.
2.3 Output Files
The program mar345 writes all relevant messages to standard output but it also produces several types of log files, depending on the configuration. Since log files can be important to look at in case of software or hardware problems, the program creates different versions of log files named:
1.) | $MARLOGDIR/log/mar.log.X | (always) |
2.) | $MARLOGDIR/spy/mar.spy.X | (configuration file entry: USE SPY) |
3.) | $MARLOGDIR/lp/mar.lp.X | (configuration file entry: USE STATS) |
where X is a number running from 1 to 99. All log files reside in the subdirectory assigend by the logical variable MARLOGDIR. In this directory, there is also a file called "last.log" that contains only the version number of the latest (i.e. current) log file and a soft link of mar.log to the latest mar.log.X file in subdirectory log. Accordingly, soft links are also set to files mar.spy and mar.lp if configured..Up to 99 copies of the log files will be kept and then cyclically overwritten.