Compaq MTEK6000 user manual Warranty Information

Page 75

MTEK6000 SERIES USER'S MANUAL

APPENDIX F: Warranty Information

WARRANTY INFORMATION

The seller warrants its hardware to be free from defects in material and workmanship under normal and proper use for a period of one year from the date the hardware is shipped from Metretek, Incorporated. The seller’s sole liability and the buyer’s sole remedy for any breach of the foregoing provision is, at the seller’s option, the timely no-charge repair or replacement of any defective hardware or part that Metretek inspects and finds reasonable evidence that a defect in material or workmanship exists. The buyer shall provide the labor required to remove the defective hardware and install its replacement at no charge to the seller. The equipment will be shipped to the seller at the buyer’s expense. The replacement or repaired equipment will be shipped to the buyer at the seller’s expense.

Warranty claims to be honored under this warranty must be made promptly. Such claims shall specify the nature and details of the claim, the date that the cause of the claim was first observed, and the affected equipment’s unit serial number. Defective equipment shall not be returned to the seller’s factory without prior authorization from the seller. A copy of the claim’s documentation must be attached to the defective equipment and sent to the seller’s

manufacturing facility. Defective components replaced under this warranty shall become the property of the seller.

The seller makes no representation or warranty other than those set forth in this agreement. THE WARRANTY STATED HEREIN IS EXPRESSLY IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY EXPRESSED OR

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SUCH WARRANTY CONSTITUTES THE ONLY WARRANTY MADE BY THE SELLER WITH RESPECT TO THIS AGREEMENT, THE EQUIPMENT UNITS, OR THE SERVICES TO BE SUPPLIED HEREBY. THE SELLER SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND.

The warranty will not extend to equipment subjected to accident, to misuse, or to alterations/repair not made and documented in writing by Metretek.

January 2002

F-1

Image 75
Contents MTEK6000 Series Table of Contents Optional Equipment List of Figures January January Hazardous Locations OverviewONE-YEAR Warranty ComplianceSecurity Options MTEK6000 exterior view MTEK6000 interior view Initial Check OUT UnpackingPower for the MTEK6000 Optional Power SuppliesMounting the Instrument on the Meter Output Shaft Rotation Setting UP the Index AssemblyCounter Masking Unit and Index RotationWall and Pipe Mounting Pulse Input to the MTEK6000Wall Mounting Transducers in the MTEK6000 Connecting the Pressure TubingTypical Installation for MTEK6000 EFC Pipe Size Insertion Thermowell Length Part Number Installing the Thermal ProbePulse Output Wiring Installing the Pulse Output WiringUncorrected Pulse Output Specifications Volume and Alarm Pulse SpecificationsModem Communications 2400 Baud Connecting the Telephone LineCommunications RS-232C Serial Direct Communications 9600 BaudActivity Indicator MTEK6000 Function RS232 cable connected January References GroundingJanuary Display Mode SLEEP/WAKE-UP ModeViewing and clearing alarms using the magnet Alarm ModeHigh Differential Pressure Alarm EFM Faulty Counter Alarm EFCFirst Time Power Alarm High Flow Rate Alarm EFC & EFMLost Temperature Alarm Low Pressure AlarmLow Supply Volts Alarms Low Temperature AlarmOpen Door Alarm optional Software Error AlarmMemory History Logging Editing Parameters Configuration ModeOptional Keypad and Display Analog Sampling Assigning Function KeysAudit Trail Wake-Up on Pulse Event DrivenSpecial Key Combinations Calibrating the Pressure Transducer Calibration ModeZero NEW? Calibrating the Temperature TransducerCalibrating the Differential Pressure Transmitter EFM Only Analog Output AO Option Optional EquipmentAnalog Output Option MTEK6000 Analog Output Specifications Zero x.xxx 04.000 +y.yyy mA Enclosure Maintenance Changing the BatteryCalibration PcGas Meter Utility Package PcGas Customer MonitorMtek Manager DC2000 January Label I.D Description Address Alarms Alarm CodeTable A-5 Standard alarms for MTEK6000 EFC w/ Aux Pressure Label Description Address Aux Pressure Table A-11 Standard alarms for MTEK6000 EFC2 w/2 Aux Press Table A-14 Standard alarms for MTEK6000 EFM w/ Aux Press MTEK6000 EPR MTEK6000 ETR MTEK6000 Eptr January NX19 Supercompressibility Report AGA-7 Volume CalculationsJanuary Analog Sampling Rate seconds Alarm Pulse Output Enable/DisableAlarm Pulse Time ms Audit Trail Logging EnableConfiguration Password Base TemperatureCalibrate Mode Time-out Calibration PasswordFlow Rate Update Interval s Cubic Unit/Pulse In or Meter DriveDate Month, Day, Year High Temperature Alarm Reset High Flow Rate Alarm SetpointHigh Pressure Alarm Setpoint High Pressure Alarm ResetLow Temperature Alarm Reset Low Pressure Alarm SetpointLow Supply Voltage Alarm Reset Low Supply Voltage Alarm SetpointWake Up On Pulse event driven EFC Uncorrected VolumeTime Hhmmss Hours, Minutes, Seconds Wake Up Interval secondsAccumulations Flow & VolumeTemperature Differential Units of MeasureJanuary SBC Revision a Corrector Board Description Jumper position OPT Revision a Option BoardPulse Input #1 PLI Revision C Phone Line Interface Consumer Information and FCC Requirements Service RequirementWarranty & Repair Service EL0001 Sheet 1 of 2 Class I Division 2 Installation EL0001 Sheet 2 of 2 Class I Division 2 Installation Warranty Information January Appendix G TII Station Protector January Appendix H Hazardous Area Installation Control Drawings October October