Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
Cases not involving a machine defect
Reference
page
| The SAVING function is working. | 45 | |
| Select NORMAL for STANDBY MODE item in the SETUP | ||
Schedule | menu. |
| |
The internal clock has been reset. |
| ||
function does |
| ||
not work | Once you turn off the projector in the SAVING mode or the | 65, 69 | |
| AC power, the current date and time setting is reset. | ||
| Check the DATE AND TIME setting for WIRELESS |
| |
| SETUP or WIRED SETUP in the NETWORK menu. |
| |
When the | Disconnect the LAN cable and check that the projector |
| |
projector is | is working properly. |
| |
connected to | If this phenomenon occurs after connecting to the network, |
| |
wired LAN, it | there may be a loop between two Ethernet switching hubs |
| |
powers off and | within the network, as explained below. |
| |
on as described | - There are two or more Ethernet switching hubs in a network. |
| |
below. | - Two of the hubs are doubly connected by LAN cables. | – | |
Powers off | |||
- This double connection forms a loop between the two hubs. | |||
|
| ||
POWER indicator | Such a loop may have an adverse effect on the projector |
| |
blinks in orange a | as well as the other network devices. |
| |
few times | Check the network connection and remove the loop by |
| |
Goes into | disconnecting the LAN cables such that there is only one |
| |
connecting cable between two hubs. |
| ||
standby mode |
|
|
NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.
106