Apple CP-X2021WN, CP-X2521WN Date, Wireless, WPA2-PSKAES WPA2-PSKTKIP, Off Wpa-Pskaes, Encryption

Page 65

NETWORK menu

Item

 

Description

 

 

 

 

 

Use the ▲/▼/◄/► buttons to enter the Year (last

 

 

two digits), Month, Date, Hour and Minute.

 

 

• When this item is set, the same item in the

 

 

WIRED SETUP menu is overwritten with the same

 

 

setting (￿69).

 

DATE AND

• The projector will override this setting and retrieve

 

DATE AND TIME information from the Time server

 

TIME

 

when SNTP is enabled. (Date/Time Settings in

 

 

 

 

the Network Guide)

This setting will be reset if the projector is turned

off while STANDBY MODE in the SETUP menu is set to SAVING (￿45), or when the AC power is turned off.

 

 

Use the ▲/▼ buttons to select the channel of the

 

 

wireless LAN to be used while MODE (￿63) is set

 

 

to ADHOC. Select according to the settings of your

 

 

computer.

 

 

 

The channels 1 to 11 are available. To save the

 

 

setting, press the ► button.

 

WIRELESS

CH

• The available channels would be various

SETUP

 

depending on a country. In addition, wireless

(continued)

 

network card might be required due to the

 

 

standard.

 

 

 

• This item can only be selected when MODE

 

 

is set to ADHOC. When MODE is set to

 

 

INFRASTRUCTURE, the channel is automatically

 

 

selected.

 

 

 

Use the ▲/▼ buttons to select the encryption

 

 

method to be used.

 

 

 

WPA2-PSK(AES) ￿ WPA2-PSK(TKIP)

 

 

￿

￿

 

 

OFF

WPA-PSK(AES)

 

 

￿

￿

 

ENCRYPTION

WEP 64bit￿WEP 128bit￿WPA-PSK(TKIP)

 

To save the setting, press the ► button.

 

 

• When MODE (￿63) is set to ADHOC, either

 

 

WPA-PSK and WPA2-PSK cannot be selected.

 

 

• If IEEE802.11 n is used while MODE is set to

 

 

INFRASTRUCTURE, TKIP and WEP are disabled.

 

 

• If OFF or AES is not selected, communication will

 

 

switch automatically to IEEE802.11 b/g.

(continued on next page)

65

Image 65
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Contents Checking the contents of package FeaturesHOT Part namesSTANDBY/ON button Control panelRear panel 11 ~ Computer button Remote controlDown button Volume + button Arrangement Setting upArrangement Arrangement About Plug-and-Play capability Connecting with your devicesComputer Connecting with your devicesWireless adapter optional Computer External device Access PointUSB Storage DeviceVCR/DVD/Blu-ray DiscTM player Monitor SpeakersConnecting to a power supply Using the security bar and slot Installing the batteries Remote controlAbout the remote control signal Hitachi Maxell or Hitachi MaxellUsing as a simple PC mouse & keyboard STANDBY/ON button Power indicator Power on/offTurning on the power Precaution for lens cover attachment and removal Turning off the powerVolume +/- button Adjusting the volumeOperating Temporarily muting the soundMY Source Selecting an input signalFor an Hdmitm signal Searching an input signalSelecting an aspect ratio Search buttonAdjusting the zoom and focus Adjusting the projectors elevatorZoom ring Focus ringAdjusting the position Using the automatic adjustment featureKeystone button Correcting the keystone distortionsMagnify ON/OFF button Using the magnify featureTemporarily blanking the screen Temporarily freezing the screenFreeze button Blank buttonAdvanced Menu Using the menu functionEasy Menu Indication Meaning Indication in OSD On Screen DisplayDescription Picture ModeAspect Auto KeystoneInstallation ECO ModeReset Filter TimeBrightness Picture menuContrast GammaColor Temp CustomColor TintMY Memory LOAD-1,LOAD-2,LOAD-3,LOAD-4 SharpnessSAVE-1, SAVE-2, SAVE-3, SAVE-4 Image menu For a computer signalFor an Hdmitm signal USB Type B or Hdmi port PositionAuto Adjust PhaseSize ExecuteTV Film OFF Input menuHigh MID LOW Video NRHdmi Range Video FormatHdmi Format Auto Sync on G OFF ComputerFrame Lock On OFFResolution Setup menu ECO Intelligent ECO Normal Auto ECO ModeMonitor OUT Standby ModeNormal Saving Audio menu VolumeSpeaker Audio SourceEnglish Français Deutsch Español Screen menuBlank Start UPMyScreen registration is finished Capturing error has occurred. Please try againDescription MyScreen No Input is Detected MyScreen LockSync is OUT of Range Invalid Scan FreqSource Name Test Pattern DOT-LINE1 DOT-LINE2 DOT-LINE3 TemplateDisplay Description Closed CaptionMode ChannelOption menu Direct PowerAuto Search USB Type B portOFF Auto PowerMouse USB Display USB Type BAir filter Cancel OKLamp Time MY Button Altitude ServiceGhost Control Panel Remote ControlFilter Message KEY LockCommunication Type Commands Network Bridge FunctionNetwork Guide Control port Serial SettingsBaud Rate ParityTransmission Method 59 Response Limit TimeInformation Factory ResetAdhoc Infrastructure Wireless SetupNetwork menu Dhcp DefaultIP Address SubnetDate WirelessWPA2-PSKAES WPA2-PSKTKIP OFF WPA-PSKAES#1 Default #2 Default #3 Default Wireless Setup SsidWireless Information Wired Setup Wired Information Projector Name AMX D.D MY ImagePresentation QuitUser Name Multi PCSecurity menu PasswordEnter to the Security menu SecurityMyScreen Turning on the MyScreen PasswordTurning off the MyScreen Password Turning on the PIN Lock PIN LockTurning off the PIN Lock If you have forgotten your PIN codeTurning off the Transition Detector Transition DetectorTurning on the Transition Detector Turning off the MY Text Password MY Text PasswordTurning on the MY Text Password Writing MY TextPC-LESS Presentation Presentation toolsSupported storage media Supported formatSupported file format and its extension PC-LESS PresentationOperating by buttons or keys Setup menu for the selected imageButton operation Down Enter InputOperating by the menu on the Thumbnail screen PC-LESS Presentation Button operation Functions Operations for still imagesDown Enter InputSlideshow Mode Return Example of playlist.txt files PlaylistUSB Port USB cable 1 piece USB DisplayHardware and software requirement for computer USB Display Right-Click menu Optimize Performance Keep PC resolutionTransmission speed Image qualityType number DT01191 Replacing the lamp MaintenanceReplacing the lamp Lamp warning High Voltage High Temperature High PressureType number UX36761 Filter set Cleaning and replacing the air filterCleaning and replacing the air filter Other care Caring for the cabinet and remote controlInside of the projector Caring for the lensThere is no input signal TroubleshootingAn improper signal is input Related messagesButton operation is not available Internal temperature is risingPower Lamp Temp Regarding the indicator lampsAt least 1 Power on schedule is saved to Indicator Indicator indicatorOff Please refer to Schedule Settings in the Network ProjectorPhenomenon Cases not involving a machine defect Resetting all settingsUSB Type B port is selected as the picture input Audio SOURCE/SPEAKER setting is not correctBrightness is adjusted to an extremely low level Freeze function is working Network USB TypeDisconnect the LAN cable and check that the projector Phenomenon Cases not involving a machine defect ReferenceEnd User License Agreement for the Projector Software Specifications