Apple CP-X2521WN, CP-X3021WN, CP-X2021WN user manual Normal Saving, Standby Mode, Monitor OUT

SETUP menu

Item	Description
	Using ▲/▼ buttons switches the standby mode setting between
	NORMAL and SAVING.
	NORMAL ￿ SAVING
	When SAVING is selected, the power consumption in the standby
	mode is lowered with some functional restriction as below:
	• When SAVING is selected, the RS-232C communication control
	except to turn the projector on and the network function are disabled
STANDBY MODE	while the projector is in the standby mode. If the COMMUNICATION
	TYPE in the COMMUNICATION menu is set to NETWORK
	BRIDGE, all of the RS-232C commands are disabled (￿59).
	• When SAVING is selected, AUDIO OUT STANDBY setting of
	AUDIO SOURCE (￿46) is invalid, and no signal is output from
	AUDIO OUT port in the standby mode.
	• When SAVING is selected, STANDBY setting of MONITOR OUT
	is invalid, and no signal is output from MONITOR OUT port in the
	standby mode.
	While the image signal from the input port chosen in step (1) is
	projected, the image signal from the input port selected in step (2) is
	output to MONITOR OUT port.
	(1) Choose a picture input port using ▲/▼ buttons.
	Choose STANDBY to select the picture
	output in the standby mode.
	(2) Select one of the COMPUTER IN ports
	using ◄/► buttons.
	Select OFF to disable the MONITOR OUT
MONITOR OUT	port for the input port or standby mode
	chosen in the step (1).
	• You cannot select COMPUTER IN2 for COMPUTER IN1, and vice
	versa.
	• If you have changed the setting of STANDBY, it applies only to
	the current standby mode, NORMAL or SAVING, selected under
	STANDBY MODE, without changing the setting of the other mode.
	The factory settings are as follows:
	- COMPUTER IN1 for the NORMAL mode of STANDBY MODE
	- OFF for the SAVING mode of STANDBY MODE

45