Apple CP-X2521WN Turning on the MyScreen Password, Turning off the MyScreen Password

Page 75

ENTER PASSWORD box

(large)

ENTER NEW PASSWORD

box (small)

SECURITY menu

Item

Description

MyScreen

PASSWORD

The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten.

1 Turning on the MyScreen PASSWORD

1-1 Use the ▲/▼ buttons on the SECURITY menu to select MyScreen PASSWORD and press the ► button to display the MyScreen PASSWORD on/ off menu.

1-2 Use the ▲/▼ buttons on the MyScreen PASSWORD on/off menu to select ON. The ENTER NEW PASSWORD box (small) will be displayed.

1-3 Use the ▲/▼/◄/► buttons to enter the password. Move the cursor to the right side of the ENTER NEW PASSWORD box (small) and press the ► button to display the NEW PASSWORD AGAIN box, enter the same PASSWORD again.

1-4 Move the cursor to the right side of the NEW PASSWORD AGAIN box and press the ► button to display the NOTE NEW PASSWORD box for about 30 seconds, please make note of the password during this time.

Pressing the ENTER button on the remote control or ► button on the projector will return to MyScreen PASSWORD on/off menu.

When a password is set for MyScreen:

•The MyScreen registration function (and menu) will be unavailable.

•The MyScreen Lock menu will be unavailable.

•The START UP setting will be locked on MyScreen (and the menu will be unavailable).

Turning the MyScreen PASSWORD off will allow normal operation of these functions.

•Please do not forget your MyScreen PASSWORD.

2 Turning off the MyScreen PASSWORD

2-1 Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off menu.

2-2 Select OFF to display the ENTER PASSWORD box (large). Enter the registered password and the screen will return to the MyScreen PASSWORD on/off menu.

If an incorrect PASSWORD is input, the menu will close. If necessary, repeat the process from 2-1.

3 If you have forgotten your password

3-1 Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off menu.

3-2 Select OFF to display the ENTER PASSWORD box (large). The 10 digit Inquiring Code will be displayed inside the box.

3-3 Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your user registration information is conﬁrmed.

(continued on next page)

75

Image 75

Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents Checking the contents of package FeaturesHOT Part namesControl panel Rear panel 11 ~STANDBY/ON button Remote control Down button Volume + buttonComputer button Arrangement Setting upArrangement Arrangement About Plug-and-Play capability Connecting with your devicesComputer Connecting with your devicesStorage Device Computer External device Access PointWireless adapter optional USBVCR/DVD/Blu-ray DiscTM player Monitor SpeakersConnecting to a power supply Using the security bar and slot Hitachi Maxell or Hitachi Maxell Remote controlInstalling the batteries About the remote control signalUsing as a simple PC mouse & keyboard Power on/off Turning on the powerSTANDBY/ON button Power indicator Precaution for lens cover attachment and removal Turning off the powerTemporarily muting the sound Adjusting the volumeVolume +/- button OperatingMY Source Selecting an input signalSearch button Searching an input signalFor an Hdmitm signal Selecting an aspect ratioFocus ring Adjusting the projectors elevatorAdjusting the zoom and focus Zoom ringAdjusting the position Using the automatic adjustment featureKeystone button Correcting the keystone distortionsMagnify ON/OFF button Using the magnify featureBlank button Temporarily freezing the screenTemporarily blanking the screen Freeze buttonUsing the menu function Easy MenuAdvanced Menu Indication Meaning Indication in OSD On Screen DisplayAuto Keystone Picture ModeDescription AspectFilter Time ECO ModeInstallation ResetGamma Picture menuBrightness ContrastTint CustomColor Temp ColorSharpness SAVE-1, SAVE-2, SAVE-3, SAVE-4MY Memory LOAD-1,LOAD-2,LOAD-3,LOAD-4 For a computer signal For an Hdmitm signalImage menu USB Type B or Hdmi port PositionExecute PhaseAuto Adjust SizeVideo NR Input menuTV Film OFF High MID LOWVideo Format Hdmi FormatHdmi Range On OFF ComputerAuto Sync on G OFF Frame LockResolution Setup menu ECO Intelligent ECO Normal Auto ECO ModeStandby Mode Normal SavingMonitor OUT Audio Source VolumeAudio menu SpeakerStart UP Screen menuEnglish Français Deutsch Español BlankCapturing error has occurred. Please try again Description MyScreenMyScreen registration is ﬁnished Invalid Scan Freq MyScreen LockNo Input is Detected Sync is OUT of RangeSource Name Test Pattern DOT-LINE1 DOT-LINE2 DOT-LINE3 TemplateChannel Description Closed CaptionDisplay ModeUSB Type B port Direct PowerOption menu Auto SearchUSB Type B Auto PowerOFF Mouse USB DisplayCancel OK Lamp TimeAir ﬁlter MY Button Altitude ServiceKEY Lock Control Panel Remote ControlGhost Filter MessageCommands Network Bridge Function Network GuideCommunication Type Parity Serial SettingsControl port Baud RateTransmission Method 59 Response Limit TimeInformation Factory ResetWireless Setup Network menuAdhoc Infrastructure Subnet DefaultDhcp IP AddressOFF WPA-PSKAES WirelessDate WPA2-PSKAES WPA2-PSKTKIP#1 Default #2 Default #3 Default Wireless Setup SsidWireless Information Wired Setup Wired Information Projector Name AMX D.D MY ImagePresentation QuitUser Name Multi PCSecurity PasswordSecurity menu Enter to the Security menuTurning on the MyScreen Password Turning off the MyScreen PasswordMyScreen If you have forgotten your PIN code PIN LockTurning on the PIN Lock Turning off the PIN LockTransition Detector Turning on the Transition DetectorTurning off the Transition Detector MY Text Password Turning on the MY Text PasswordTurning off the MY Text Password Writing MY TextSupported format Presentation toolsPC-LESS Presentation Supported storage mediaSupported ﬁle format and its extension PC-LESS PresentationDown Enter Input Setup menu for the selected imageOperating by buttons or keys Button operationOperating by the menu on the Thumbnail screen PC-LESS Presentation Enter Input Operations for still imagesButton operation Functions DownSlideshow Mode Return Example of playlist.txt ﬁles PlaylistUSB Display Hardware and software requirement for computerUSB Port USB cable 1 piece USB Display Right-Click menu Image quality Keep PC resolutionOptimize Performance Transmission speedMaintenance Replacing the lampType number DT01191 Replacing the lamp Lamp warning High Voltage High Temperature High PressureType number UX36761 Filter set Cleaning and replacing the air ﬁlterCleaning and replacing the air ﬁlter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorRelated messages TroubleshootingThere is no input signal An improper signal is inputButton operation is not available Internal temperature is risingPower Lamp Temp Regarding the indicator lampsProjector Indicator Indicator indicatorAt least 1 Power on schedule is saved to Off Please refer to Schedule Settings in the NetworkPhenomenon Cases not involving a machine defect Resetting all settingsAudio SOURCE/SPEAKER setting is not correct Brightness is adjusted to an extremely low levelUSB Type B port is selected as the picture input Freeze function is working Network USB TypeDisconnect the LAN cable and check that the projector Phenomenon Cases not involving a machine defect ReferenceEnd User License Agreement for the Projector Software Speciﬁcations