Apple CP-X3021WN, CP-X2521WN, CP-X2021WN user manual Response Limit Time, Transmission Method 59

OPTION menu

Item		Description
		RESPONSE LIMIT TIME
		Select the time period to wait for receiving
		response data from other device communicating by
		the NETWORK BRIDGE and the HALF-DUPLEX
		through the CONTROL port.
		OFF ￿ 1s ￿ 2s ￿ 3s
		OFF: Select this mode if it is not required to check
		the responses from the device that the projector
SERVICE	COMMUNICATION	sends data to. In this mode, the projector can
		send out data from the computer continuously.
(continued)	(continued)
		1s /2s /3s: Select the time period to keep the
		projector waiting for response from the device
		that the projector sends data to. While waiting the
		response, the projector does not send out any
		data from the CONTROL port.
		• This menu is available only when the NETWORK
		BRIDGE is selected for the COMMUNICATION
		TYPE and the HALF-DUPLEX is selected for the
		TRANSMISSION METHOD (￿59, 60).
		• OFF is selected as the default setting.

(continued on next page)

61