Apple CP-X3021WN, CP-X2521WN, CP-X2021WN Audio menu, Volume, Speaker, Audio Source, Hdmi Audio

AUDIO menu

AUDIO menu

From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table.

Item		Description
VOLUME	Using the ◄/► buttons adjusts the volume.
	Low ￿ High
SPEAKER	Using the ▲/▼ buttons turns on/off the built-in speaker.
	ON ￿ OFF
	When OFF is selected, the built-in speaker does not work.
	While the image signal from the input port chosen in step (1) is
	projected, the audio signal from the input port selected in step
	(2) is output to both the AUDIO OUT port and built-in speaker of
	this projector. However, the built-in speaker does not work when
	SPEAKER is set to OFF.
	(1) Choose a picture input port using the
	▲/▼ buttons.
	Choose AUDIO OUT STANDBY to
	select the sound output in the standby
	mode.
	(2) Select an audio input port or the mute
	icon using the ◄/► buttons.
AUDIO SOURCE	The icons indicate the following;
	No.1: AUDIO IN1 port	No.2: AUDIO IN2 port
	No.3: LAN port	No.4: USB TYPE B port
	No.5: HDMI port		: mutes the sound
	• Audio input from port nos 3 to 5 can only be selected by each of
	the picture input ports.
	• Even if the projector is in the standby mode, cooling fans may
	work and make noises when the built-in speaker is in operation.
	• C.C. (Closed Caption) is automatically activated when			is selected
	and an input signal containing C.C. is received. This function is
	available only when the signal is NTSC for VIDEO or S-VIDEO, or
	480i@60 for COMPUTER IN1 or COMPUTER IN2, and when AUTO
	is selected for DISPLAY in the C.C. menu under the SCREEN menu
	(￿52).
	Using the ▲/▼ buttons switches the mode for the HDMITM audio.
HDMI AUDIO	Check each of the two modes provided and select the suitable one
	for your HDMITM audio device.
	1 ￿ 2

46