Apple CP-X3021WN, CP-X2521WN, CP-X2021WN user manual Audio SOURCE/SPEAKER setting is not correct

Page 103

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

The signal cables are not correctly connected.

10 ~ 14

 

Correctly connect the audio cables.

 

 

 

The MUTE function is working.

21

 

Restore the sound pressing MUTE or VOLUME +/-

 

button on the remote control.

 

 

The volume is adjusted to an extremely low level.

21, 46

 

Adjust the volume to a higher level using the menu

 

function or the remote control.

 

Sound does

The AUDIO SOURCE/SPEAKER setting is not correct.

46

not come out.

Correctly set the AUDIO SOURCE/SPEAKER in AUDIO menu.

 

 

The mode selected for HDMI AUDIO is not suitable.

 

 

Check each of the two modes provided and select the

46

 

suitable one for your HDMITM audio device.

 

 

The Sound button or checkbox is disabled.

 

 

If you have selected USB TYPE B, remove the check

 

 

mark from the Sound checkbox in the Options window of

92

 

"LiveViewer Lite for USB".

 

 

 

If you have selected LAN, remove the check mark from

 

 

the Sound checkbox in the Option menu of "LiveViewer".

 

 

The lens cover is attached.

4, 20

 

Remove the lens cover.

 

 

 

The signal cables are not correctly connected.

10 ~ 14

 

Correctly connect the connection cables.

 

 

 

The brightness is adjusted to an extremely low level.

33

 

Adjust BRIGHTNESS to a higher level using the menu

 

function.

 

 

The computer cannot detect the projector as a plug

 

 

and play monitor.

10

No pictures are

Make sure that the computer can detect a plug and play

 

displayed.

monitor using another plug and play monitor.

 

 

The BLANK screen is displayed.

28

 

Press BLANK button on the remote control.

 

 

 

The USB TYPE B port is selected as the picture input

 

 

source even if MOUSE is selected for USB TYPE B.

 

 

Select USB DISPLAY for USB TYPE B in OPTION menu

54

 

to project the picture input to the port. Otherwise select

 

 

other port for picture input.

 

 

"Waiting for connection." remains displayed even

 

 

though the USB TYPE B port is selected.

89

 

Remove the USB cable and reconnect after a while.

 

(continued on next page)

103

Page 102 Page 104
Image 103
Page 102 Page 104
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Contents Checking the contents of package FeaturesHOT Part namesRear panel 11 ~ Control panelSTANDBY/ON button Down button Volume + button Remote controlComputer button Arrangement Setting upArrangement Arrangement About Plug-and-Play capability Connecting with your devicesComputer Connecting with your devicesStorage Device Computer External device Access PointWireless adapter optional USBVCR/DVD/Blu-ray DiscTM player Monitor SpeakersConnecting to a power supply Using the security bar and slot Hitachi Maxell or Hitachi Maxell Remote controlInstalling the batteries About the remote control signalUsing as a simple PC mouse & keyboard Turning on the power Power on/offSTANDBY/ON button Power indicator Precaution for lens cover attachment and removal Turning off the powerTemporarily muting the sound Adjusting the volumeVolume +/- button OperatingMY Source Selecting an input signalSearch button Searching an input signalFor an Hdmitm signal Selecting an aspect ratioFocus ring Adjusting the projectors elevatorAdjusting the zoom and focus Zoom ringAdjusting the position Using the automatic adjustment featureKeystone button Correcting the keystone distortionsMagnify ON/OFF button Using the magnify featureBlank button Temporarily freezing the screenTemporarily blanking the screen Freeze buttonEasy Menu Using the menu functionAdvanced Menu Indication Meaning Indication in OSD On Screen DisplayAuto Keystone Picture ModeDescription AspectFilter Time ECO ModeInstallation ResetGamma Picture menuBrightness ContrastTint CustomColor Temp ColorSAVE-1, SAVE-2, SAVE-3, SAVE-4 SharpnessMY Memory LOAD-1,LOAD-2,LOAD-3,LOAD-4 For an Hdmitm signal For a computer signalImage menu USB Type B or Hdmi port PositionExecute PhaseAuto Adjust SizeVideo NR Input menuTV Film OFF High MID LOWHdmi Format Video FormatHdmi Range On OFF ComputerAuto Sync on G OFF Frame LockResolution Setup menu ECO Intelligent ECO Normal Auto ECO ModeNormal Saving Standby ModeMonitor OUT Audio Source VolumeAudio menu SpeakerStart UP Screen menuEnglish Français Deutsch Español BlankDescription MyScreen Capturing error has occurred. Please try againMyScreen registration is finished Invalid Scan Freq MyScreen LockNo Input is Detected Sync is OUT of RangeSource Name Test Pattern DOT-LINE1 DOT-LINE2 DOT-LINE3 TemplateChannel Description Closed CaptionDisplay ModeUSB Type B port Direct PowerOption menu Auto SearchUSB Type B Auto PowerOFF Mouse USB DisplayLamp Time Cancel OKAir filter MY Button Altitude ServiceKEY Lock Control Panel Remote ControlGhost Filter MessageNetwork Guide Commands Network Bridge FunctionCommunication Type Parity Serial SettingsControl port Baud RateTransmission Method 59 Response Limit TimeInformation Factory ResetNetwork menu Wireless SetupAdhoc Infrastructure Subnet DefaultDhcp IP AddressOFF WPA-PSKAES WirelessDate WPA2-PSKAES WPA2-PSKTKIP#1 Default #2 Default #3 Default Wireless Setup SsidWireless Information Wired Setup Wired Information Projector Name AMX D.D MY ImagePresentation QuitUser Name Multi PCSecurity PasswordSecurity menu Enter to the Security menuTurning off the MyScreen Password Turning on the MyScreen PasswordMyScreen If you have forgotten your PIN code PIN LockTurning on the PIN Lock Turning off the PIN LockTurning on the Transition Detector Transition DetectorTurning off the Transition Detector Turning on the MY Text Password MY Text PasswordTurning off the MY Text Password Writing MY TextSupported format Presentation toolsPC-LESS Presentation Supported storage mediaSupported file format and its extension PC-LESS PresentationDown Enter Input Setup menu for the selected imageOperating by buttons or keys Button operationOperating by the menu on the Thumbnail screen PC-LESS Presentation Enter Input Operations for still imagesButton operation Functions DownSlideshow Mode Return Example of playlist.txt files PlaylistHardware and software requirement for computer USB DisplayUSB Port USB cable 1 piece USB Display Right-Click menu Image quality Keep PC resolutionOptimize Performance Transmission speedReplacing the lamp MaintenanceType number DT01191 Replacing the lamp Lamp warning High Voltage High Temperature High PressureType number UX36761 Filter set Cleaning and replacing the air filterCleaning and replacing the air filter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorRelated messages TroubleshootingThere is no input signal An improper signal is inputButton operation is not available Internal temperature is risingPower Lamp Temp Regarding the indicator lampsProjector Indicator Indicator indicatorAt least 1 Power on schedule is saved to Off Please refer to Schedule Settings in the NetworkPhenomenon Cases not involving a machine defect Resetting all settingsBrightness is adjusted to an extremely low level Audio SOURCE/SPEAKER setting is not correctUSB Type B port is selected as the picture input Freeze function is working Network USB TypeDisconnect the LAN cable and check that the projector Phenomenon Cases not involving a machine defect ReferenceEnd User License Agreement for the Projector Software Specifications
Top Page Image Contents