NETWORK menu
Item
Description
Selecting this item displays the WIRED SETUP menu for the wired LAN.
Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item.
|
| Use the ▲/▼ buttons to turn DHCP on/off. |
|
| ON OFF |
|
| Select OFF when the network does not have |
| DHCP | DHCP enabled. To save the setting, press the ► |
| button. | |
| (Dynamic Host | |
| Configuration | • When the “DHCP” setting changes to “ON”, it |
| Protocol) | takes a little time to obtain IP address from DHCP |
|
| server. |
|
| • Auto IP function will be assigned an IP address if |
|
| the projector could not obtain an IP address from |
|
| server even if DHCP is “ON”. |
|
| Use the ▲/▼/◄/► buttons to enter the IP |
|
| ADDRESS. |
|
| This function can only be used when DHCP is set |
WIRED SETUP | to OFF. | |
| IP ADDRESS | • The IP ADDRESS is the number that identifies |
|
| this projector on the network. You cannot have two |
|
| devices with the same IP ADDRESS on the same |
|
| network. |
|
| • The IP ADDRESS “0.0.0.0” is prohibited. |
|
| Use the ▲/▼/◄/► buttons to enter the same |
| SUBNET | SUBNET MASK used by your computer. |
| This function can only be used when DHCP is set | |
| MASK | |
| to OFF. | |
|
| |
|
| • The SUBNET MASK “0.0.0.0” is prohibited. |
|
|
|
|
| Use the ▲/▼/◄/► buttons to enter the DEFAULT |
| DEFAULT | GATEWAY (a node on a computer network that |
| serves as an access point to another network) | |
| GATEWAY | address. |
|
| This function can only be used when DHCP is set |
|
| to OFF. |
|
| Use the ▲/▼/◄/► buttons to input the DNS |
| DNS SERVER | server address. |
| The DNS server is a system to control domain | |
|
| names and IP addresses on the Network. |
(continued on next page) |
| |
68