Apple CP-X2521WN, CP-X3021WN, CP-X2021WN user manual Input menu, TV Film OFF, High MID LOW, Video NR

INPUT menu

INPUT menu

From the INPUT menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

Item

Description

Using the ▲/▼ buttons switches the progress mode.

TV ￿ FILM ￿ OFF

• This function works only for a video signal, s-video signal, component

video signal (of 480i@60 or 576i@50 or 1080i@50/60) and an HDMITM PROGRESSIVE signal (of 480i@60 or 576i@50 or 1080i@50/60).

•When TV or FILM is selected, the screen image will be sharp. FILM adapts to the 2-3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a quick moving object. In such a case, please select OFF, even though the screen image may lose sharpness.

Using the ▲/▼ buttons switches the noise reduction mode.

HIGH ￿ MID ￿ LOW

VIDEO NR

•This function works only for a video signal, s-video signal,

component video signal (of 480i@60 or 576i@50 or 1080i@50/60) and an HDMITM signal (of 480i@60 or 576i@50 or 1080i@50/60).

Using the ▲/▼ buttons switches the mode for color space.

AUTO ￿ RGB ￿ SMPTE240 ￿ REC709 ￿ REC601

• This item can be selected only for a computer signal (except for COLOR SPACE signals from the LAN, USB TYPE A and USB TYPE B ports) or a

component video signal.

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.

(continued on next page)

39