Apple CP-X3021WN, CP-X2521WN, CP-X2021WN user manual Setup menu, Auto Keystone

Page 43

SETUP menu

SETUP menu

From the SETUP menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

Item

Description

Selecting this item performs the Automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself.

This function will be executed only once when selected in the menu. When the slant of the projector is changed, execute this function again.

The adjustable range of this function will vary among inputs. For some input, this function may not work well.

When REAR / CEILING or FRONT / CEILING is selected for the INSTALLATION item in the SETUP menu, this function may not

AUTO KEYSTONE

work correctly if the projector screen is slanted or tilted downwards.

 

• When the zoom adjustment is set to the TELE (telephoto focus),

 

this function may be excessive. This function should be used when

 

the zoom adjustment is set to the full WIDE (wide-angle focus)

 

whenever possible.

 

• When the projector is placed on the level (about ±4°), this function

 

may not work.

 

• When the projector is inclined to near ±30 degree or over, this

 

function may not work well.

 

• This function will be unavailable when the Transition Detector is on

 

(￿77) .

 

Using the ◄/► buttons corrects the vertical keystone distortion.

 

Shrink the bottom of the image ￿ Shrink the top of the image

The adjustable range of this function will vary among inputs. For some input, this function may not work well.

KEYSTONE • When the zoom adjustment is set to the TELE (telephoto focus), this function may be excessive. This function should be used when

the zoom adjustment is set to the full WIDE (wide-angle focus) whenever possible.

This function will be unavailable when the Transition Detector is on (￿77).

(continued on next page)

43

Image 43
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Contents Checking the contents of package FeaturesHOT Part namesRear panel 11 ~ Control panelSTANDBY/ON button Down button Volume + button Remote controlComputer button Arrangement Setting upArrangement Arrangement About Plug-and-Play capability Connecting with your devicesComputer Connecting with your devicesStorage Device Computer External device Access PointWireless adapter optional USBVCR/DVD/Blu-ray DiscTM player Monitor SpeakersConnecting to a power supply Using the security bar and slot Hitachi Maxell or Hitachi Maxell Remote controlInstalling the batteries About the remote control signalUsing as a simple PC mouse & keyboard Turning on the power Power on/offSTANDBY/ON button Power indicator Precaution for lens cover attachment and removal Turning off the powerTemporarily muting the sound Adjusting the volumeVolume +/- button OperatingMY Source Selecting an input signalSearch button Searching an input signalFor an Hdmitm signal Selecting an aspect ratioFocus ring Adjusting the projectors elevatorAdjusting the zoom and focus Zoom ringAdjusting the position Using the automatic adjustment featureKeystone button Correcting the keystone distortionsMagnify ON/OFF button Using the magnify featureBlank button Temporarily freezing the screenTemporarily blanking the screen Freeze buttonEasy Menu Using the menu functionAdvanced Menu Indication Meaning Indication in OSD On Screen DisplayAuto Keystone Picture ModeDescription AspectFilter Time ECO ModeInstallation ResetGamma Picture menuBrightness ContrastTint CustomColor Temp ColorSAVE-1, SAVE-2, SAVE-3, SAVE-4 SharpnessMY Memory LOAD-1,LOAD-2,LOAD-3,LOAD-4 For an Hdmitm signal For a computer signalImage menu USB Type B or Hdmi port PositionExecute PhaseAuto Adjust SizeVideo NR Input menuTV Film OFF High MID LOW Hdmi Format Video Format Hdmi Range On OFF ComputerAuto Sync on G OFF Frame LockResolution Setup menu ECO Intelligent ECO Normal Auto ECO ModeNormal Saving Standby ModeMonitor OUT Audio Source VolumeAudio menu SpeakerStart UP Screen menuEnglish Français Deutsch Español BlankDescription MyScreen Capturing error has occurred. Please try againMyScreen registration is finished Invalid Scan Freq MyScreen LockNo Input is Detected Sync is OUT of RangeSource Name Test Pattern DOT-LINE1 DOT-LINE2 DOT-LINE3 TemplateChannel Description Closed CaptionDisplay ModeUSB Type B port Direct PowerOption menu Auto SearchUSB Type B Auto PowerOFF Mouse USB DisplayLamp Time Cancel OKAir filter MY Button Altitude ServiceKEY Lock Control Panel Remote ControlGhost Filter MessageNetwork Guide Commands Network Bridge FunctionCommunication Type Parity Serial SettingsControl port Baud RateTransmission Method 59 Response Limit TimeInformation Factory ResetNetwork menu Wireless SetupAdhoc Infrastructure Subnet DefaultDhcp IP AddressOFF WPA-PSKAES WirelessDate WPA2-PSKAES WPA2-PSKTKIP#1 Default #2 Default #3 Default Wireless Setup SsidWireless Information Wired Setup Wired Information Projector Name AMX D.D MY ImagePresentation QuitUser Name Multi PCSecurity PasswordSecurity menu Enter to the Security menuTurning off the MyScreen Password Turning on the MyScreen PasswordMyScreen If you have forgotten your PIN code PIN LockTurning on the PIN Lock Turning off the PIN LockTurning on the Transition Detector Transition DetectorTurning off the Transition Detector Turning on the MY Text Password MY Text PasswordTurning off the MY Text Password Writing MY TextSupported format Presentation toolsPC-LESS Presentation Supported storage mediaSupported file format and its extension PC-LESS PresentationDown Enter Input Setup menu for the selected imageOperating by buttons or keys Button operationOperating by the menu on the Thumbnail screen PC-LESS Presentation Enter Input Operations for still imagesButton operation Functions DownSlideshow Mode Return Example of playlist.txt files PlaylistHardware and software requirement for computer USB DisplayUSB Port USB cable 1 piece USB Display Right-Click menu Image quality Keep PC resolutionOptimize Performance Transmission speedReplacing the lamp MaintenanceType number DT01191 Replacing the lamp Lamp warning High Voltage High Temperature High PressureType number UX36761 Filter set Cleaning and replacing the air filterCleaning and replacing the air filter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorRelated messages TroubleshootingThere is no input signal An improper signal is inputButton operation is not available Internal temperature is risingPower Lamp Temp Regarding the indicator lampsProjector Indicator Indicator indicatorAt least 1 Power on schedule is saved to Off Please refer to Schedule Settings in the NetworkPhenomenon Cases not involving a machine defect Resetting all settingsBrightness is adjusted to an extremely low level Audio SOURCE/SPEAKER setting is not correctUSB Type B port is selected as the picture input Freeze function is working Network USB TypeDisconnect the LAN cable and check that the projector Phenomenon Cases not involving a machine defect ReferenceEnd User License Agreement for the Projector Software Specifications