Ampro Corporation 5001692A manual Connectors, Jumpers, and LEDs, Connector Definitions, Ide, Usb

Chapter 2 Product Overview

Connectors, Jumpers, and LEDs

Connector Definitions

Table 2-2 describes the connectors shown in Figures 2-4 to 2-6. Refer to Appendix B for part #s.

Table 2-2. Module Connector Descriptions

Jack/Plug #			Access	Description
P1A/1B & P1C/1D –			Top/	104-pin connector used for PC/104 (ISA) bus
		PC/104 Bus	Bottom
J2	– Ethernet		Top	8-pin, 0.1”, connector used for the Ethernet interface
J3	– Serial 1 (COM1)		Top	10-pin, 0.1”, connector used for the Serial 1 interface
J4	– Floppy/Parallel		Top	26-pin, 0.1”, connector provides the Floppy/Parallel interface
J5	– Utility		Top	10-pin, 0.1”, connector used for the Utility interface
J6	– IDE		Top	44-pin, 2mm connector used for the IDE interface
J7	– Power		Top	10-pin, 0.1”, connector used for the Power connection
J8	– GPIO (User)		Top	10-pin, 2mm connector used for the User defined GPIO signals
J9	– Serial 2 (COM2)		Top	10-pin, 0.1”, connector used for the Serial 2 interface
J10		– USB	Top	5-pin, 0.1”, connector used for the USB interface
J11		– Video	Top	44-pin, 2mm connector used for the LCD/CRT interface
J12		– CompactFlash	Bottom	50-pin connector used for CompactFlash cards
J13		– Serial 3 (COM3)	Top	10-pin, 0.1”, connector used for the Serial 3 interface
J14		– Serial 4 (COM4)	Top	10-pin, 0.1”, connector used for the Serial 4 interface

IDE (J6)

Serial 4 (J14) (COM 4)

Serial 2 (J9) (COM 2)

J9

J11

2

1

JP6	9	J14
	10	10

D8JP7

U12	L5		U3
	JP9
		JP8
	U11	U7	U8

	J5	JP1
4	2	J3
3	1
J13 JP5	JP4

U36	U35
	1	J4
	2J8
U9	U10	U6

Utility (J5)

Serial 1 (J3) (COM 1)

Serial 3 (J13) (COM 3)

GPIO (J8)

Floppy/Parallel (J4)

Video (J11)	U40	U41	U5
			D2
		D1

U14	U15	J2
U13

J10

U16

USB (J10)

J7	P1	JP2
Power (J7)

Ethernet (J2)

P1B	_01b
	CM420RFM
P1C
P1A
P1D
(PC104 Bus)

Figure 2-4. Connector Locations (Top View)

CoreModule 420 Reference Manual 11