Random Access Adjustment Mode
Gamma
With the gamma correction adjustment, it is possible to accurately set the gamma of the projector image.
To change the gamma value, highlight Gamma by pushing the control disc up or down and press ENTER.
PICTURE TUNING |
SYNC [SLOW] |
STILL VIDEO [ON] |
COLOR TEMPERATURE |
GAMMA |
DECODING [EBU] |
GAMMA = 2.2 |
3 |
Decoding EBU/IRE
Only for NTSC signals.
The possibility is offered to decode the NTSC video signals via the default American IRE standard or via the European EBU standard. Decoding a NTSC signal using the European EBU standard may result in a greenish tint.
Highlight Decoding by pushing the control disc up or down and press ENTER to select.
Dynamic Color Depth
Increases color contrast for all video and data sources.
Highlight Dynamic color depth by pushing the control disc up or down and press ENTER to select.
OFF : default position
MIN : half of the effect of MED.
MED : maximum color contrast without change in color tint or loss of detail.
MAX : maximum color contrast.
Noise Reduction
Reduces noise and pixel jitter in all video and data sources.
Highlight Noise reduction by pushing the control disc up or down and press ENTER to select.
OFF : off
MIN : removes system noise.
Auto : noise reduction without motion blur.
MAX : maximum noise reduction (may cause motion blur).
PICTURE TUNING
CTI [ON]
STILL VIDEO [ON]
COLOR TEMPERATURE GAMMA 
DECODING [EBU] 
DYNAMIC COLOR DEPTH
NOISE REDUCTION
EDGE ENHANCEMENT
Select with 
or 
then <ENTER>
<EXIT> to return.
PICTURE TUNING
CTI [ON]
STILL VIDEO [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
EDGE ENHANCEMENT
Select with 
or 
then <ENTER>
<EXIT> to return.
DYNAMIC COLOR DEPTH
OFF MIN MED MAX
PICTURE TUNING
CTI [ON]
STILL VIDEO [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
EDGE ENHANCEMENT
Select with 
or 
then <ENTER> <EXIT> to return.
NOISE REDUCTION | ||
MIN | AUTO | MAX |
5975938 BARCOREALITY 9200TCR+ 020798 | ||