Installation Mode
Red on Green convergence
1Highlight 'Red on Green' by pushing the Control disc up or down and press ENTER to display the Red on green test pattern. The drawings and digit will be displayed in red.
2Adjust position 1, 2 and 3 to obtain an optimal focus for these lines.
3 Due to interaction, it will be necessary to repeat step 2.
4Adjust position 4 and 5 for optimal convergence of the lines in 4 and 5.
5Adjust position 6 for optimal convergence of the vertical lines in 6.
6 Check if all lines are correctly converged.
Hatch
To check the result of the convergence adjustment, higlight Hatch and press ENTER. A hatch pattern will be displayed on the screen.
ENTER : inverts the pattern
EXIT : returns to the installation menu.
ADJUST : exits the adjustment mode.
All lines must be displayed in white, if not so repeat the convergence adjustment procedure.
About MOCA
This item gives information about the software version of the MOCA unit.
Highlight 'About MOCA' by pushing the control disc up or down and press ENTER to select.
Software version of the MOCA unit is indicated on the menu.
CONVERGENCE | |
GREEN TO MIDPOSITION | |
GREEN |
|
BLUE ON GREEN | |
RED ON GREEN | |
HATCH |
|
ABOUT MOCA | |
Select with | or |
then <ENTER> | |
<EXIT> to return. | |
CONVERGENCE |
GREEN TO MIDPOSITION |
GREEN |
BLUE ON GREEN |
RED ON GREEN |
HATCH |
ABOUT MOCA |
CONVERGENCE |
GREEN TO MIDPOSITION |
GREEN |
BLUE ON GREEN |
RED ON GREEN |
HATCH |
ABOUT MOCA |
About MOCA |
MOtorized |
Convergence |
Adjustment |
Soft version : 1.00 |
| 5975938 BARCOREALITY 9200TCR+ 020798 | |
|