Service Mode
Lamp Run Time History
To get an overview of the different lamp run times, highlight Lamp Run Time History by pushing the control disc up or down and press
ENTER.
A listing with the lamp serial number and the corresponding run time will be displayed.
The actual installed lamp will be marked.
Press EXIT to return to the service mode selection menu.
Lamp Drive Mode
The lamp can be driven in three different modes : SILENT, NORMAL or BOOST.
Highlight Lamp Drive Mode by pushing the control disc up or down to select the Lamp Drive menu.
Highlight the desired lamp drive mode by pushing the control disc up or down and press ENTER to select.
BARCO logo
The BARCO logo can be added to the image, in overlay or on a background, on any place on the screen.
To add the BARCO logo or to change a setting in the BARCO logo menu, highlight 'BARCO logo' by pushing the control disc up or down and press ENTER to select.
The BARCO logo menu will be displayed on the screen. Within this menu, three toggle settings and a shift control are available.
STATUS [ON/OFF]
ON : BARCO logo will be displayed on the screen.
OFF : No BARCO logo displayed on the screen.
BACKGROUND [ON/OFF]
ON : BARCO logo will be displayed on a black background.
OFF : BARCO logo will be displayed without any background.
SHIFT
By pushing the control disc up, down, to the left or to the right, the BARCO logo can be positioned anywhere on the screen.
HOT KEY [TEXT/OFF]
OFF : no key on the RCU is used to display the BARCO logo.
TEXT : the TEXT key on the RCU is used to display or to remove the BARCO logo with one single push on this key (only in operational :mode).
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE
MORE...
Select with | or |
|
then <ENTER> LAMP RUNTIME HISTORY | ||
<EXIT> to |
|
|
| Serial No | Runtime |
> | 0111121 | 600 h |
| 0110031 | 980 h |
| 0110010 | 1000 h |
| <EXIT> | to return |
SERVICE
IDENTIFICATION
CHANGEPASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE
LAMP DRIVE MODE
SILENT
NORMAL
BOOST
Select with | or |
then <ENTER> | |
<EXIT> to | return. |
SERVICE
BARCO LOGO
PANEL ADJUSTMENTS
PRESET INPUT BALANCE
I2C DIAGNOSIS
MORE...
BARCO LOGO
STATUS : ON
BACKGROUND : ON
SHIFT
HOT KEY : TEXT
Select with or then <ENTER> <EXIT> to return.
5975938 BARCOREALITY 9200TCR+ 020798 |
| |
|