Source Numbers 80 - 89 and 90 - 99
CSOURCE NUMBERS 80 - 89 AND 90 - 99
Projector without any 800 peripheral connected.
The source numbers 80 - 89 and 90 - 99 do not correspond to physical inputs. An additional adjustment file can be created for these source numbers. This file can contain different settings. The relationship between sources 0 - 9 and 90 - 99 or between 0 - 9 and 80 - 89 is shown in the diagram below.
source input 1
source input 2
source input 3
source input 9
source number 1 | file A |
source number 81 | file A' |
source number 91 | file A'' |
source number 2 | file B |
source number 82 | file B' |
source number 92 | file B'' |
source number 3 | file C |
source number 83 | file C' |
source number 93 | file C'' |
source number 9 | file I |
source number 89 | file I' |
source number 99 | file I'' |
Follow the steps below to create a second or a third file for sources 0 to 9 :
1.Select the source between 0 and 9.
2.Select the corresponding source number between 80 and 99 with the digit keys on the RCU.
3.Enter the adjustment mode and load a corresponding file. Edit this file if necessary.
4.Save the file and exit the adjustment mode.
Projector with a 800 peripheral connected.
Source numbers 90 - 99.
The source numbers 90 - 99 do not correspond to physical inputs. An additional adjustment file can be created for these source numbers (source numbers of the 800 peripheral). This file can contain different settings. The relationship between sources 0 - 9 of the 800 peripheral and 90 - 99 is shown in the diagram below.
source input 1 | source number 1 | file A | |
source number 91 | file A' | ||
| |||
source input 2 | source number 2 | file B | |
source number 92 | file B' | ||
| |||
source input 3 | source number 3 | file C | |
source number 93 | file C' | ||
| |||
source input 9 | source number 9 | file I | |
source number 99 | file I' | ||
|
Follow the same procedure as for a projector without a 800 peripheral connected.
5975738 BARCOREALITY 9200TCR+ 020798 |
| |
|