3M X35N Operating, Adjusting the volume, Temporarily muting the sound, Selecting an input signal

3M™ Digital Projector X30N/X35N

Operating

Operating

Adjusting the volume

VOLUME +/- button

1. Use the VOLUME +/VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the volume. The dialog will automatically disappear after a few seconds.

MY SOURCE/ STANDBY/ON

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY FREEZE PAGE UP VOLUME

PAGE

DOWN

●When is selected for current picture input port, the volume adjustment is disabled. Please see AUDIO SOURCE item of AUDIO menu (37).

●When the projector is in the standby mode, the volume can be

KEYSTONE MY BUTTON MUTE

POSITIONMENU

adjusted if is not selected for the AUDIO OUT STANDBY and NORMAL is selected to the STANDBY MODE in the SETUP menu (36).

Temporarily muting the sound

1. Press MUTE button on the remote control.

A dialog will appear on the screen indicating that you have muted the sound.

To restore the sound, press the MUTE, VOLUME + or VOLUME - button. The dialog will automatically disappear after a few seconds.

●When is selected for current picture input port, the sound is always muted. Please see AUDIO SOURCE item of AUDIO menu (37).

MUTE button

MY SOURCE/ STANDBY/ON

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY	FREEZE PAGE UP	VOLUME
	PAGE
	DOWN
KEYSTONE	MY BUTTON	MUTE

POSITIONMENU

●C.C. (Closed Caption) is automatically activated when sound is muted and an input signal containing C.C.is received. This function is available only when the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPONENT, COMPUTER IN1 or COMPUTER IN2, and when AUTO is selected for DISPLAY in the C.C. menu under the SCREEN menu (42).

Selecting an input signal

1.	Press INPUT button on the projector.	INPUT button
	Each time you press the button, the projector switches to
	the next input port as shown below.
	COMPUTER IN1  COMPUTER IN2
	VIDEO  S-VIDEO  COMPONENT (Y, Cb/Pb, Cr/Pr)

●While ON is selected for AUTO SEARCH item in OPTION menu (43), the projector will keep checking the ports in above order repeatedly till an input signal is detected.

(continued on next page)

16 © 3M 2009. All Rights Reserved.